x86/sev: Add the host SEV-SNP initialization support

The memory integrity guarantees of SEV-SNP are enforced through a new
structure called the Reverse Map Table (RMP). The RMP is a single data
structure shared across the system that contains one entry for every 4K
page of DRAM that may be used by SEV-SNP VMs. The goal of RMP is to
track the owner of each page of memory. Pages of memory can be owned by
the hypervisor, owned by a specific VM or owned by the AMD-SP. See APM2
section 15.36.3 for more detail on RMP.

The RMP table is used to enforce access control to memory. The table itself
is not directly writable by the software. New CPU instructions (RMPUPDATE,
PVALIDATE, RMPADJUST) are used to manipulate the RMP entries.

Based on the platform configuration, the BIOS reserves the memory used
for the RMP table. The start and end address of the RMP table must be
queried by reading the RMP_BASE and RMP_END MSRs. If the RMP_BASE and
RMP_END are not set then disable the SEV-SNP feature.

The SEV-SNP feature is enabled only after the RMP table is successfully
initialized.

RMP table entry format is non-architectural and it can vary by processor
and is defined by the PPR. Restrict SNP support on the known CPU model
and family for which the RMP table entry format is currently defined for.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-b: Ashish Kalra <ashish.kalra@amd.com>

3 files changed, 169 insertions, 1 deletions

diff --git a/arch/x86/include/asm/disabled-features.h b/arch/x86/include/asm/disabled-features.h
index 36369e76cc63..c1be3091a383 100644
--- a/arch/x86/include/asm/disabled-features.h
+++ b/arch/x86/include/asm/disabled-features.h
@@ -68,6 +68,12 @@
 # define DISABLE_TDX_GUEST	(1 << (X86_FEATURE_TDX_GUEST & 31))
 #endif
 
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+# define DISABLE_SEV_SNP	0
+#else
+# define DISABLE_SEV_SNP	(1 << (X86_FEATURE_SEV_SNP & 31))
+#endif
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -91,7 +97,7 @@
 			 DISABLE_ENQCMD)
 #define DISABLED_MASK17	0
 #define DISABLED_MASK18	0
-#define DISABLED_MASK19	0
+#define DISABLED_MASK19	(DISABLE_SEV_SNP)
 #define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 20)
 
 #endif /* _ASM_X86_DISABLED_FEATURES_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index d27e0581b777..fd85a6e102f6 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -539,6 +539,8 @@
 #define MSR_AMD64_SEV_ENABLED		BIT_ULL(MSR_AMD64_SEV_ENABLED_BIT)
 #define MSR_AMD64_SEV_ES_ENABLED	BIT_ULL(MSR_AMD64_SEV_ES_ENABLED_BIT)
 #define MSR_AMD64_SEV_SNP_ENABLED	BIT_ULL(MSR_AMD64_SEV_SNP_ENABLED_BIT)
+#define MSR_AMD64_RMP_BASE		0xc0010132
+#define MSR_AMD64_RMP_END		0xc0010133
 
 #define MSR_AMD64_VIRT_SPEC_CTRL	0xc001011f
 
@@ -618,6 +620,10 @@
 #define MSR_AMD64_SYSCFG		0xc0010010
 #define MSR_AMD64_SYSCFG_MEM_ENCRYPT_BIT	23
 #define MSR_AMD64_SYSCFG_MEM_ENCRYPT	BIT_ULL(MSR_AMD64_SYSCFG_MEM_ENCRYPT_BIT)
+#define MSR_AMD64_SYSCFG_SNP_EN_BIT		24
+#define MSR_AMD64_SYSCFG_SNP_EN		BIT_ULL(MSR_AMD64_SYSCFG_SNP_EN_BIT)
+#define MSR_AMD64_SYSCFG_SNP_VMPL_EN_BIT	25
+#define MSR_AMD64_SYSCFG_SNP_VMPL_EN	BIT_ULL(MSR_AMD64_SYSCFG_SNP_VMPL_EN_BIT)
 #define MSR_K8_INT_PENDING_MSG		0xc0010055
 /* C1E active bits in int pending message */
 #define K8_INTP_C1E_ACTIVE_MASK		0x18000000
diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c
index c05f0124c410..f08a7dd6b7ff 100644
--- a/arch/x86/kernel/sev.c
+++ b/arch/x86/kernel/sev.c
@@ -22,6 +22,8 @@
 #include <linux/efi.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/cpumask.h>
+#include <linux/amd-iommu.h>
 
 #include <asm/cpu_entry_area.h>
 #include <asm/stacktrace.h>
@@ -57,6 +59,12 @@
 #define AP_INIT_CR0_DEFAULT		0x60000010
 #define AP_INIT_MXCSR_DEFAULT		0x1f80
 
+/*
+ * The first 16KB from the RMP_BASE is used by the processor for the
+ * bookkeeping, the range need to be added during the RMP entry lookup.
+ */
+#define RMPTABLE_CPU_BOOKKEEPING_SZ	0x4000
+
 /* For early boot hypervisor communication in SEV-ES enabled guests */
 static struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
 
@@ -69,6 +77,10 @@ static struct ghcb *boot_ghcb __section(".data");
 /* Bitmap of SEV features supported by the hypervisor */
 static u64 sev_hv_features __ro_after_init;
 
+static unsigned long rmptable_start __ro_after_init;
+static unsigned long rmptable_end __ro_after_init;
+
+
 /* #VC handler runtime per-CPU data */
 struct sev_es_runtime_data {
 	struct ghcb ghcb_page;
@@ -2249,3 +2261,147 @@ static int __init snp_init_platform_device(void)
 	return 0;
 }
 device_initcall(snp_init_platform_device);
+
+#undef pr_fmt
+#define pr_fmt(fmt)	"SEV-SNP: " fmt
+
+static int __snp_enable(unsigned int cpu)
+{
+	u64 val;
+
+	if (!cpu_feature_enabled(X86_FEATURE_SEV_SNP))
+		return 0;
+
+	rdmsrl(MSR_AMD64_SYSCFG, val);
+
+	val |= MSR_AMD64_SYSCFG_SNP_EN;
+	val |= MSR_AMD64_SYSCFG_SNP_VMPL_EN;
+
+	wrmsrl(MSR_AMD64_SYSCFG, val);
+
+	return 0;
+}
+
+static __init void snp_enable(void *arg)
+{
+	__snp_enable(smp_processor_id());
+}
+
+static bool get_rmptable_info(u64 *start, u64 *len)
+{
+	u64 calc_rmp_sz, rmp_sz, rmp_base, rmp_end, nr_pages;
+
+	rdmsrl(MSR_AMD64_RMP_BASE, rmp_base);
+	rdmsrl(MSR_AMD64_RMP_END, rmp_end);
+
+	if (!rmp_base || !rmp_end) {
+		pr_info("Memory for the RMP table has not been reserved by BIOS\n");
+		return false;
+	}
+
+	rmp_sz = rmp_end - rmp_base + 1;
+
+	/*
+	 * Calculate the amount the memory that must be reserved by the BIOS to
+	 * address the full system RAM. The reserved memory should also cover the
+	 * RMP table itself.
+	 *
+	 * See PPR Family 19h Model 01h, Revision B1 section 2.1.4.2 for more
+	 * information on memory requirement.
+	 */
+	nr_pages = totalram_pages();
+	calc_rmp_sz = (((rmp_sz >> PAGE_SHIFT) + nr_pages) << 4) + RMPTABLE_CPU_BOOKKEEPING_SZ;
+
+	if (calc_rmp_sz > rmp_sz) {
+		pr_info("Memory reserved for the RMP table does not cover full system RAM (expected 0x%llx got 0x%llx)\n",
+			calc_rmp_sz, rmp_sz);
+		return false;
+	}
+
+	*start = rmp_base;
+	*len = rmp_sz;
+
+	pr_info("RMP table physical address 0x%016llx - 0x%016llx\n", rmp_base, rmp_end);
+
+	return true;
+}
+
+static __init int __snp_rmptable_init(void)
+{
+	u64 rmp_base, sz;
+	void *start;
+	u64 val;
+
+	if (!get_rmptable_info(&rmp_base, &sz))
+		return 1;
+
+	start = memremap(rmp_base, sz, MEMREMAP_WB);
+	if (!start) {
+		pr_err("Failed to map RMP table 0x%llx+0x%llx\n", rmp_base, sz);
+		return 1;
+	}
+
+	/*
+	 * Check if SEV-SNP is already enabled, this can happen if we are coming from
+	 * kexec boot.
+	 */
+	rdmsrl(MSR_AMD64_SYSCFG, val);
+	if (val & MSR_AMD64_SYSCFG_SNP_EN)
+		goto skip_enable;
+
+	/* Initialize the RMP table to zero */
+	memset(start, 0, sz);
+
+	/* Flush the caches to ensure that data is written before SNP is enabled. */
+	wbinvd_on_all_cpus();
+
+	/* Enable SNP on all CPUs. */
+	on_each_cpu(snp_enable, NULL, 1);
+
+skip_enable:
+	rmptable_start = (unsigned long)start;
+	rmptable_end = rmptable_start + sz - 1;
+
+	return 0;
+}
+
+static int __init snp_rmptable_init(void)
+{
+	int family, model;
+
+	if (!boot_cpu_has(X86_FEATURE_SEV_SNP))
+		return 0;
+
+	family = boot_cpu_data.x86;
+	model  = boot_cpu_data.x86_model;
+
+	/*
+	 * RMP table entry format is not architectural and it can vary by processor and
+	 * is defined by the per-processor PPR. Restrict SNP support on the known CPU
+	 * model and family for which the RMP table entry format is currently defined for.
+	 */
+	if (family != 0x19 || model > 0xaf)
+		goto nosnp;
+
+	if (amd_iommu_snp_enable())
+		goto nosnp;
+
+	if (__snp_rmptable_init())
+		goto nosnp;
+
+	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/rmptable_init:online", __snp_enable, NULL);
+
+	return 0;
+
+nosnp:
+	setup_clear_cpu_cap(X86_FEATURE_SEV_SNP);
+	return 1;
+}
+
+/*
+ * This must be called after the PCI subsystem. This is because before enabling
+ * the SNP feature we need to ensure that IOMMU supports the SNP feature.
+ * The amd_iommu_snp_enable() is used for checking and enabling the feature and,
+ * and it is available after subsys_initcall().
+ */
+fs_initcall(snp_rmptable_init);