diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/platform_data/mv_usb.h | 18 | ||||
| -rw-r--r-- | include/linux/platform_data/s3c-hsudc.h | 34 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 12 |
3 files changed, 61 insertions, 3 deletions
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index e9d9149ddf38..d94804aca764 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -42,9 +42,23 @@ struct mv_usb_platform_data { /* only valid for HCD. OTG or Host only*/ unsigned int mode; - int (*phy_init)(unsigned int regbase); - void (*phy_deinit)(unsigned int regbase); + /* This flag is used for that needs id pin checked by otg */ + unsigned int disable_otg_clock_gating:1; + /* Force a_bus_req to be asserted */ + unsigned int otg_force_a_bus_req:1; + + int (*phy_init)(void __iomem *regbase); + void (*phy_deinit)(void __iomem *regbase); int (*set_vbus)(unsigned int vbus); + int (*private_init)(void __iomem *opregs, void __iomem *phyregs); }; +#ifndef CONFIG_HAVE_CLK +/* Dummy stub for clk framework */ +#define clk_get(dev, id) NULL +#define clk_put(clock) do {} while (0) +#define clk_enable(clock) do {} while (0) +#define clk_disable(clock) do {} while (0) +#endif + #endif diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h new file mode 100644 index 000000000000..6fa109339bf9 --- /dev/null +++ b/include/linux/platform_data/s3c-hsudc.h @@ -0,0 +1,34 @@ +/* + * S3C24XX USB 2.0 High-speed USB controller gadget driver + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. + * Each endpoint can be configured as either in or out endpoint. Endpoints + * can be configured for Bulk or Interrupt transfer mode. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_USB_S3C_HSUDC_H +#define __LINUX_USB_S3C_HSUDC_H + +/** + * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. + * @epnum: Number of endpoints to be instantiated by the controller driver. + * @gpio_init: Platform specific USB related GPIO initialization. + * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. + * + * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget + * controllers. + */ +struct s3c24xx_hsudc_platdata { + unsigned int epnum; + void (*gpio_init)(void); + void (*gpio_uninit)(void); +}; + +#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 317d8925387c..da653b5c7134 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/scatterlist.h> #include <linux/types.h> #include <linux/usb/ch9.h> @@ -32,6 +33,9 @@ struct usb_ep; * @dma: DMA address corresponding to 'buf'. If you don't set this * field, and the usb controller needs one, it is responsible * for mapping and unmapping the buffer. + * @sg: a scatterlist for SG-capable controllers. + * @num_sgs: number of SG entries + * @num_mapped_sgs: number of SG entries mapped to DMA (internal) * @length: Length of that data * @stream_id: The stream id, when USB3.0 bulk streams are being used * @no_interrupt: If true, hints that no completion irq is needed. @@ -88,6 +92,10 @@ struct usb_request { unsigned length; dma_addr_t dma; + struct scatterlist *sg; + unsigned num_sgs; + unsigned num_mapped_sgs; + unsigned stream_id:16; unsigned no_interrupt:1; unsigned zero:1; @@ -164,7 +172,7 @@ struct usb_ep { unsigned maxpacket:16; unsigned max_streams:16; unsigned mult:2; - unsigned maxburst:4; + unsigned maxburst:5; u8 address; const struct usb_endpoint_descriptor *desc; const struct usb_ss_ep_comp_descriptor *comp_desc; @@ -479,6 +487,7 @@ struct usb_gadget_ops { * @speed: Speed of current connection to USB host. * @max_speed: Maximal speed the UDC can handle. UDC must support this * and all slower speeds. + * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable @@ -519,6 +528,7 @@ struct usb_gadget { struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; enum usb_device_speed max_speed; + unsigned sg_supported:1; unsigned is_otg:1; unsigned is_a_peripheral:1; unsigned b_hnp_enable:1; |