sysfs-driver-firmware-zynqmp (9884B)
1What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs* 2Date: March 2020 3KernelVersion: 5.6 4Contact: "Jolly Shah" <jollys@xilinx.com> 5Description: 6 Read/Write PMU global general storage register value, 7 GLOBAL_GEN_STORAGE{0:3}. 8 Global general storage register that can be used 9 by system to pass information between masters. 10 11 The register is reset during system or power-on 12 resets. Three registers are used by the FSBL and 13 other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}. 14 15 Usage:: 16 17 # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 18 # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 19 20 Example:: 21 22 # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 23 # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 24 25Users: Xilinx 26 27What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs* 28Date: March 2020 29KernelVersion: 5.6 30Contact: "Jolly Shah" <jollys@xilinx.com> 31Description: 32 Read/Write PMU persistent global general storage register 33 value, PERS_GLOB_GEN_STORAGE{0:3}. 34 Persistent global general storage register that 35 can be used by system to pass information between 36 masters. 37 38 This register is only reset by the power-on reset 39 and maintains its value through a system reset. 40 Four registers are used by the FSBL and other Xilinx 41 software products: PERS_GLOB_GEN_STORAGE{4:7}. 42 Register is reset only by a POR reset. 43 44 Usage:: 45 46 # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 47 # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 48 49 Example:: 50 51 # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 52 # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 53 54Users: Xilinx 55 56What: /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope 57Date: March 2020 58KernelVersion: 5.6 59Contact: "Jolly Shah" <jollys@xilinx.com> 60Description: 61 This sysfs interface allows to set the shutdown scope for the 62 next shutdown request. When the next shutdown is performed, the 63 platform specific portion of PSCI-system_off can use the chosen 64 shutdown scope. 65 66 Following are available shutdown scopes(subtypes): 67 68 subsystem: 69 Only the APU along with all of its peripherals 70 not used by other processing units will be 71 shut down. This may result in the FPD power 72 domain being shut down provided that no other 73 processing unit uses FPD peripherals or DRAM. 74 ps_only: 75 The complete PS will be shut down, including the 76 RPU, PMU, etc. Only the PL domain (FPGA) 77 remains untouched. 78 system: 79 The complete system/device is shut down. 80 81 Usage:: 82 83 # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope 84 # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope 85 86 Example:: 87 88 # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope 89 # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope 90 91Users: Xilinx 92 93What: /sys/devices/platform/firmware\:zynqmp-firmware/health_status 94Date: March 2020 95KernelVersion: 5.6 96Contact: "Jolly Shah" <jollys@xilinx.com> 97Description: 98 This sysfs interface allows to set the health status. If PMUFW 99 is compiled with CHECK_HEALTHY_BOOT, it will check the healthy 100 bit on FPD WDT expiration. If healthy bit is set by a user 101 application running in Linux, PMUFW will do APU only restart. If 102 healthy bit is not set during FPD WDT expiration, PMUFW will do 103 system restart. 104 105 Usage: 106 107 Set healthy bit:: 108 109 # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status 110 111 Unset healthy bit:: 112 113 # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status 114 115Users: Xilinx 116 117What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 118Date: Feb 2022 119KernelVersion: 5.18 120Contact: "Ronak Jain" <ronak.jain@xilinx.com> 121Description: 122 This sysfs interface allows user to configure features at 123 runtime. The user can enable or disable features running at 124 firmware as well as the user can configure the parameters of 125 the features at runtime. The supported features are over 126 temperature and external watchdog. Here, the external watchdog 127 is completely different than the /dev/watchdog as the external 128 watchdog is running on the firmware and it is used to monitor 129 the health of firmware not APU(Linux). Also, the external 130 watchdog is interfaced outside of the zynqmp soc. 131 132 The supported config ids are for the feature configuration is, 133 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or 134 disable the over temperature feature. 135 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the 136 over temperature limit in Degree Celsius. 137 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable 138 the external watchdog feature. 139 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the 140 external watchdog feature. 141 142 Usage: 143 144 Select over temperature config ID to enable/disable feature 145 # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 146 147 Check over temperature config ID is selected or not 148 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 149 The expected result is 1. 150 151 Select over temperature config ID to configure OT limit 152 # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 153 154 Check over temperature config ID is selected or not 155 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 156 The expected result is 2. 157 158 Select external watchdog config ID to enable/disable feature 159 # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 160 161 Check external watchdog config ID is selected or not 162 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 163 The expected result is 3. 164 165 Select external watchdog config ID to configure time interval 166 # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 167 168 Check external watchdog config ID is selected or not 169 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 170 The expected result is 4. 171 172Users: Xilinx 173 174What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 175Date: Feb 2022 176KernelVersion: 5.18 177Contact: "Ronak Jain" <ronak.jain@xilinx.com> 178Description: 179 This sysfs interface allows to configure features at runtime. 180 The user can enable or disable features running at firmware. 181 Also, the user can configure the parameters of the features 182 at runtime. The supported features are over temperature and 183 external watchdog. Here, the external watchdog is completely 184 different than the /dev/watchdog as the external watchdog is 185 running on the firmware and it is used to monitor the health 186 of firmware not APU(Linux). Also, the external watchdog is 187 interfaced outside of the zynqmp soc. 188 189 By default the features are disabled in the firmware. The user 190 can enable features by querying appropriate config id of the 191 features. 192 193 The default limit for the over temperature is 90 Degree Celsius. 194 The default timer interval for the external watchdog is 570ms. 195 196 The supported config ids are for the feature configuration is, 197 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or 198 disable the over temperature feature. 199 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the 200 over temperature limit in Degree Celsius. 201 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable 202 the external watchdog feature. 203 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the 204 external watchdog feature. 205 206 Usage: 207 208 Enable over temperature feature 209 # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 210 # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 211 212 Check whether the over temperature feature is enabled or not 213 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 214 The expected result is 1. 215 216 Disable over temperature feature 217 # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 218 # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 219 220 Check whether the over temperature feature is disabled or not 221 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 222 The expected result is 0. 223 224 Configure over temperature limit to 50 Degree Celsius 225 # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 226 # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 227 228 Check whether the over temperature limit is configured or not 229 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 230 The expected result is 50. 231 232 Enable external watchdog feature 233 # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 234 # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 235 236 Check whether the external watchdog feature is enabled or not 237 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 238 The expected result is 1. 239 240 Disable external watchdog feature 241 # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 242 # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 243 244 Check whether the external watchdog feature is disabled or not 245 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 246 The expected result is 0. 247 248 Configure external watchdog timer interval to 500ms 249 # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id 250 # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 251 252 Check whether the external watchdog timer interval is configured or not 253 # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value 254 The expected result is 500. 255 256Users: Xilinx