dev-kmsg (5229B)
1What: /dev/kmsg 2Date: Mai 2012 3KernelVersion: 3.5 4Contact: Kay Sievers <kay@vrfy.org> 5Description: The /dev/kmsg character device node provides userspace access 6 to the kernel's printk buffer. 7 8 Injecting messages: 9 10 Every write() to the opened device node places a log entry in 11 the kernel's printk buffer. 12 13 The logged line can be prefixed with a <N> syslog prefix, which 14 carries the syslog priority and facility. The single decimal 15 prefix number is composed of the 3 lowest bits being the syslog 16 priority and the next 8 bits the syslog facility number. 17 18 If no prefix is given, the priority number is the default kernel 19 log priority and the facility number is set to LOG_USER (1). It 20 is not possible to inject messages from userspace with the 21 facility number LOG_KERN (0), to make sure that the origin of 22 the messages can always be reliably determined. 23 24 Accessing the buffer: 25 26 Every read() from the opened device node receives one record 27 of the kernel's printk buffer. 28 29 The first read() directly following an open() always returns 30 first message in the buffer; there is no kernel-internal 31 persistent state; many readers can concurrently open the device 32 and read from it, without affecting other readers. 33 34 Every read() will receive the next available record. If no more 35 records are available read() will block, or if O_NONBLOCK is 36 used -EAGAIN returned. 37 38 Messages in the record ring buffer get overwritten as whole, 39 there are never partial messages received by read(). 40 41 In case messages get overwritten in the circular buffer while 42 the device is kept open, the next read() will return -EPIPE, 43 and the seek position be updated to the next available record. 44 Subsequent reads() will return available records again. 45 46 Unlike the classic syslog() interface, the 64 bit record 47 sequence numbers allow to calculate the amount of lost 48 messages, in case the buffer gets overwritten. And they allow 49 to reconnect to the buffer and reconstruct the read position 50 if needed, without limiting the interface to a single reader. 51 52 The device supports seek with the following parameters: 53 54 SEEK_SET, 0 55 seek to the first entry in the buffer 56 SEEK_END, 0 57 seek after the last entry in the buffer 58 SEEK_DATA, 0 59 seek after the last record available at the time 60 the last SYSLOG_ACTION_CLEAR was issued. 61 62 Other seek operations or offsets are not supported because of 63 the special behavior this device has. The device allows to read 64 or write only whole variable length messages (records) that are 65 stored in a ring buffer. 66 67 Because of the non-standard behavior also the error values are 68 non-standard. -ESPIPE is returned for non-zero offset. -EINVAL 69 is returned for other operations, e.g. SEEK_CUR. This behavior 70 and values are historical and could not be modified without the 71 risk of breaking userspace. 72 73 The output format consists of a prefix carrying the syslog 74 prefix including priority and facility, the 64 bit message 75 sequence number and the monotonic timestamp in microseconds, 76 and a flag field. All fields are separated by a ','. 77 78 Future extensions might add more comma separated values before 79 the terminating ';'. Unknown fields and values should be 80 gracefully ignored. 81 82 The human readable text string starts directly after the ';' 83 and is terminated by a '\n'. Untrusted values derived from 84 hardware or other facilities are printed, therefore 85 all non-printable characters and '\' itself in the log message 86 are escaped by "\x00" C-style hex encoding. 87 88 A line starting with ' ', is a continuation line, adding 89 key/value pairs to the log message, which provide the machine 90 readable context of the message, for reliable processing in 91 userspace. 92 93 Example:: 94 95 7,160,424069,-;pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) 96 SUBSYSTEM=acpi 97 DEVICE=+acpi:PNP0A03:00 98 6,339,5140900,-;NET: Registered protocol family 10 99 30,340,5690716,-;udevd[80]: starting version 181 100 101 The DEVICE= key uniquely identifies devices the following way: 102 103 ============ ================= 104 b12:8 block dev_t 105 c127:3 char dev_t 106 n8 netdev ifindex 107 +sound:card0 subsystem:devname 108 ============ ================= 109 110 The flags field carries '-' by default. A 'c' indicates a 111 fragment of a line. Note, that these hints about continuation 112 lines are not necessarily correct, and the stream could be 113 interleaved with unrelated messages, but merging the lines in 114 the output usually produces better human readable results. A 115 similar logic is used internally when messages are printed to 116 the console, /proc/kmsg or the syslog() syscall. 117 118 By default, kernel tries to avoid fragments by concatenating 119 when it can and fragments are rare; however, when extended 120 console support is enabled, the in-kernel concatenation is 121 disabled and /dev/kmsg output will contain more fragments. If 122 the log consumer performs concatenation, the end result 123 should be the same. In the future, the in-kernel concatenation 124 may be removed entirely and /dev/kmsg users are recommended to 125 implement fragment handling. 126 127Users: dmesg(1), userspace kernel log consumers