sysfs-bus-iio-isl29501 (1853B)
1What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain 2What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain_bias 3KernelVersion: 4.18 4Contact: linux-iio@vger.kernel.org 5Description: 6 This sensor has an automatic gain control (agc) loop 7 which sets the analog signal levels at an optimum 8 level by controlling programmable gain amplifiers. The 9 criteria for optimal gain is determined by the sensor. 10 11 Return the actual gain value as an integer in [0; 65536] 12 range when read from. 13 14 The agc gain read when measuring crosstalk shall be 15 written into in_proximity0_agc_gain_bias. 16 17What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_a 18What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_b 19What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_a 20What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_b 21KernelVersion: 4.18 22Contact: linux-iio@vger.kernel.org 23Description: 24 The sensor is able to perform correction of distance 25 measurements due to changing temperature and ambient 26 light conditions. It can be programmed to correct for 27 a second order error polynomial. 28 29 Phase data has to be collected when temperature and 30 ambient light are modulated independently. 31 32 Then a least squares curve fit to a second order 33 polynomial has to be generated from the data. The 34 resultant curves have the form ax^2 + bx + c. 35 36 From those two curves, a and b coefficients shall be 37 stored in in_proximity0_calib_phase_temp_a and 38 in_proximity0_calib_phase_temp_b for temperature and 39 in in_proximity0_calib_phase_light_a and 40 in_proximity0_calib_phase_light_b for ambient light. 41 42 Those values must be integer in [0; 8355840] range. 43 44 Finally, the c constant is set by the sensor 45 internally. 46 47 The value stored in sensor is displayed when read from.