sysfs-class-rnbd-client (5254B)
1What: /sys/class/rnbd-client 2Date: Feb 2020 3KernelVersion: 5.7 4Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> 5Description: Provide information about RNBD-client. 6 All sysfs files that are not read-only provide the usage information on read: 7 8 Example:: 9 10 # cat /sys/class/rnbd-client/ctl/map_device 11 12 > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr> 13 > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side> 14 > [access_mode=<ro|rw|migration>] > map_device 15 > 16 > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ] 17 18What: /sys/class/rnbd-client/ctl/map_device 19Date: Feb 2020 20KernelVersion: 5.7 21Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> 22Description: Expected format is the following:: 23 24 sessname=<name of the rtrs session> 25 path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] 26 device_path=<full path on remote side> 27 [access_mode=<ro|rw|migration>] 28 29 Where: 30 31 sessname: 32 accepts a string not bigger than 256 chars, which identifies 33 a given session on the client and on the server. 34 I.e. "clt_hostname-srv_hostname" could be a natural choice. 35 36 path: 37 describes a connection between the client and the server by 38 specifying destination and, when required, the source address. 39 The addresses are to be provided in the following format:: 40 41 ip:<IPv6> 42 ip:<IPv4> 43 gid:<GID> 44 45 for example:: 46 47 path=ip:10.0.0.66 48 49 The single addr is treated as the destination. 50 The connection will be established to this server from any client IP address. 51 52 :: 53 54 path=ip:10.0.0.66,ip:10.0.1.66 55 56 First addr is the source address and the second is the destination. 57 58 If multiple "path=" options are specified multiple connection 59 will be established and data will be sent according to 60 the selected multipath policy (see RTRS mp_policy sysfs entry description). 61 62 device_path: 63 Path to the block device on the server side. Path is specified 64 relative to the directory on server side configured in the 65 'dev_search_path' module parameter of the rnbd_server. 66 The rnbd_server prepends the <device_path> received from client 67 with <dev_search_path> and tries to open the 68 <dev_search_path>/<device_path> block device. On success, 69 a /dev/rnbd<N> device file, a /sys/block/rnbd<N>/ 70 directory and an entry in /sys/class/rnbd-client/ctl/devices 71 will be created. 72 73 If 'dev_search_path' contains '%SESSNAME%', then each session can 74 have different devices namespace, e.g. server was configured with 75 the following parameter "dev_search_path=/run/rnbd-devs/%SESSNAME%", 76 client has this string "sessname=blya device_path=sda", then server 77 will try to open: /run/rnbd-devs/blya/sda. 78 79 access_mode: 80 the access_mode parameter specifies if the device is to be 81 mapped as "ro" read-only or "rw" read-write. The server allows 82 a device to be exported in rw mode only once. The "migration" 83 access mode has to be specified if a second mapping in read-write 84 mode is desired. 85 86 By default "rw" is used. 87 88 nr_poll_queues 89 specifies the number of poll-mode queues. If the IO has HIPRI flag, 90 the block-layer will send the IO via the poll-mode queue. 91 For fast network and device the polling is faster than interrupt-base 92 IO handling because it saves time for context switching, switching to 93 another process, handling the interrupt and switching back to the 94 issuing process. 95 96 Set -1 if you want to set it as the number of CPUs 97 By default rnbd client creates only irq-mode queues. 98 99 NOTICE: MUST make a unique session for a device using the poll-mode queues. 100 101 Exit Codes: 102 103 If the device is already mapped it will fail with EEXIST. If the input 104 has an invalid format it will return EINVAL. If the device path cannot 105 be found on the server, it will fail with ENOENT. 106 107 Finding device file after mapping 108 --------------------------------- 109 110 After mapping, the device file can be found by: 111 o The symlink /sys/class/rnbd-client/ctl/devices/<device_id>@<session_name> 112 points to /sys/block/<dev-name>. The last part of the symlink destination 113 is the same as the device name. By extracting the last part of the 114 path the path to the device /dev/<dev-name> can be build. 115 116 * /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>@<session_name>/dev) 117 118 How to find the <device_id> of the device is described on the next 119 section. 120 121What: /sys/class/rnbd-client/ctl/devices/ 122Date: Feb 2020 123KernelVersion: 5.7 124Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> 125Description: For each device mapped on the client a new symbolic link is created as 126 /sys/class/rnbd-client/ctl/devices/<device_id>@<session_name>, which points 127 to the block device created by rnbd (/sys/block/rnbd<N>/). 128 The <device_id> of each device is created as follows: 129 130 - If the 'device_path' provided during mapping contains slashes ("/"), 131 they are replaced by exclamation mark ("!") and used as as the 132 <device_id>. Otherwise, the <device_id> will be the same as the 133 "device_path" provided.