sysfs-platform-dfl-port (3776B)
1What: /sys/bus/platform/devices/dfl-port.0/id 2Date: June 2018 3KernelVersion: 4.19 4Contact: Wu Hao <hao.wu@intel.com> 5Description: Read-only. It returns id of this port. One DFL FPGA device 6 may have more than one port. Userspace could use this id to 7 distinguish different ports under same FPGA device. 8 9What: /sys/bus/platform/devices/dfl-port.0/afu_id 10Date: June 2018 11KernelVersion: 4.19 12Contact: Wu Hao <hao.wu@intel.com> 13Description: Read-only. User can program different PR bitstreams to FPGA 14 Accelerator Function Unit (AFU) for different functions. It 15 returns uuid which could be used to identify which PR bitstream 16 is programmed in this AFU. 17 18What: /sys/bus/platform/devices/dfl-port.0/power_state 19Date: August 2019 20KernelVersion: 5.4 21Contact: Wu Hao <hao.wu@intel.com> 22Description: Read-only. It reports the APx (AFU Power) state, different APx 23 means different throttling level. When reading this file, it 24 returns "0" - Normal / "1" - AP1 / "2" - AP2 / "6" - AP6. 25 26What: /sys/bus/platform/devices/dfl-port.0/ap1_event 27Date: August 2019 28KernelVersion: 5.4 29Contact: Wu Hao <hao.wu@intel.com> 30Description: Read-write. Read this file for AP1 (AFU Power State 1) event. 31 It's used to indicate transient AP1 state. Write 1 to this 32 file to clear AP1 event. 33 34What: /sys/bus/platform/devices/dfl-port.0/ap2_event 35Date: August 2019 36KernelVersion: 5.4 37Contact: Wu Hao <hao.wu@intel.com> 38Description: Read-write. Read this file for AP2 (AFU Power State 2) event. 39 It's used to indicate transient AP2 state. Write 1 to this 40 file to clear AP2 event. 41 42What: /sys/bus/platform/devices/dfl-port.0/ltr 43Date: August 2019 44KernelVersion: 5.4 45Contact: Wu Hao <hao.wu@intel.com> 46Description: Read-write. Read or set AFU latency tolerance reporting value. 47 Set ltr to 1 if the AFU can tolerate latency >= 40us or set it 48 to 0 if it is latency sensitive. 49 50What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcmd 51Date: August 2019 52KernelVersion: 5.4 53Contact: Wu Hao <hao.wu@intel.com> 54Description: Write-only. User writes command to this interface to set 55 userclock to AFU. 56 57What: /sys/bus/platform/devices/dfl-port.0/userclk_freqsts 58Date: August 2019 59KernelVersion: 5.4 60Contact: Wu Hao <hao.wu@intel.com> 61Description: Read-only. Read this file to get the status of issued command 62 to userclck_freqcmd. 63 64What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcntrcmd 65Date: August 2019 66KernelVersion: 5.4 67Contact: Wu Hao <hao.wu@intel.com> 68Description: Write-only. User writes command to this interface to set 69 userclock counter. 70 71What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcntrsts 72Date: August 2019 73KernelVersion: 5.4 74Contact: Wu Hao <hao.wu@intel.com> 75Description: Read-only. Read this file to get the status of issued command 76 to userclck_freqcntrcmd. 77 78What: /sys/bus/platform/devices/dfl-port.0/errors/errors 79Date: August 2019 80KernelVersion: 5.4 81Contact: Wu Hao <hao.wu@intel.com> 82Description: Read-Write. Read this file to get errors detected on port and 83 Accelerated Function Unit (AFU). Write error code to this file 84 to clear errors. Write fails with -EINVAL if input parsing 85 fails or input error code doesn't match. Write fails with 86 -EBUSY or -ETIMEDOUT if error can't be cleared as hardware 87 in low power state (-EBUSY) or not respoding (-ETIMEDOUT). 88 89What: /sys/bus/platform/devices/dfl-port.0/errors/first_error 90Date: August 2019 91KernelVersion: 5.4 92Contact: Wu Hao <hao.wu@intel.com> 93Description: Read-only. Read this file to get the first error detected by 94 hardware. 95 96What: /sys/bus/platform/devices/dfl-port.0/errors/first_malformed_req 97Date: August 2019 98KernelVersion: 5.4 99Contact: Wu Hao <hao.wu@intel.com> 100Description: Read-only. Read this file to get the first malformed request 101 captured by hardware.