cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

technisat.rst (2905B)

      1.. SPDX-License-Identifier: GPL-2.0
      2
      3How to set up the Technisat/B2C2 Flexcop devices
      4================================================
      5
      6.. note::
      7
      8   This documentation is outdated.
      9
     10Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009
     11
     12Find out what device you have
     13-----------------------------
     14
     15Important Notice: The driver does NOT support Technisat USB 2 devices!
     16
     17First start your linux box with a shipped kernel:
     18
     19.. code-block:: none
     20
     21	lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
     22	02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
     23	Technisat SkyStar2 DVB card (rev 02)
     24
     25	dmesg | grep frontend may show you for example:
     26	DVB: registering frontend 0 (Conexant CX24123/CX24109)...
     27
     28Kernel compilation:
     29-------------------
     30
     31If the Flexcop / Technisat is the only DVB / TV / Radio device in your box
     32get rid of unnecessary modules and check this one:
     33
     34``Multimedia support`` => ``Customise analog and hybrid tuner modules to build``
     35
     36In this directory uncheck every driver which is activated there
     37(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please).
     38
     39Then please activate:
     40
     41- Main module part:
     42
     43  ``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters``
     44
     45  #) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or
     46  #) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter)
     47     and for troubleshooting purposes:
     48  #) => ``Enable debug for the B2C2 FlexCop drivers``
     49
     50- Frontend / Tuner / Demodulator module part:
     51
     52  ``Multimedia support`` => ``DVB/ATSC adapters``
     53   => ``Customise the frontend modules to build`` ``Customise DVB frontends`` =>
     54
     55  - SkyStar DVB-S Revision 2.3:
     56
     57    #) => ``Zarlink VP310/MT312/ZL10313 based``
     58    #) => ``Generic I2C PLL based tuners``
     59
     60  - SkyStar DVB-S Revision 2.6:
     61
     62    #) => ``ST STV0299 based``
     63    #) => ``Generic I2C PLL based tuners``
     64
     65  - SkyStar DVB-S Revision 2.7:
     66
     67    #) => ``Samsung S5H1420 based``
     68    #) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS``
     69    #) => ``ISL6421 SEC controller``
     70
     71  - SkyStar DVB-S Revision 2.8:
     72
     73    #) => ``Conexant CX24123 based``
     74    #) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS``
     75    #) => ``ISL6421 SEC controller``
     76
     77  - AirStar DVB-T card:
     78
     79    #) => ``Zarlink MT352 based``
     80    #) => ``Generic I2C PLL based tuners``
     81
     82  - CableStar DVB-C card:
     83
     84    #) => ``ST STV0297 based``
     85    #) => ``Generic I2C PLL based tuners``
     86
     87  - AirStar ATSC card 1st generation:
     88
     89    #) => ``Broadcom BCM3510``
     90
     91  - AirStar ATSC card 2nd generation:
     92
     93    #) => ``NxtWave Communications NXT2002/NXT2004 based``
     94    #) => ``Generic I2C PLL based tuners``
     95
     96  - AirStar ATSC card 3rd generation:
     97
     98    #) => ``LG Electronics LGDT3302/LGDT3303 based``
     99    #) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support``
    100