cpu-capacity.txt (6553B)
1========================================== 2ARM CPUs capacity bindings 3========================================== 4 5========================================== 61 - Introduction 7========================================== 8 9ARM systems may be configured to have cpus with different power/performance 10characteristics within the same chip. In this case, additional information has 11to be made available to the kernel for it to be aware of such differences and 12take decisions accordingly. 13 14========================================== 152 - CPU capacity definition 16========================================== 17 18CPU capacity is a number that provides the scheduler information about CPUs 19heterogeneity. Such heterogeneity can come from micro-architectural differences 20(e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run 21(e.g., SMP systems with multiple frequency domains). Heterogeneity in this 22context is about differing performance characteristics; this binding tries to 23capture a first-order approximation of the relative performance of CPUs. 24 25CPU capacities are obtained by running a suitable benchmark. This binding makes 26no guarantees on the validity or suitability of any particular benchmark, the 27final capacity should, however, be: 28 29* A "single-threaded" or CPU affine benchmark 30* Divided by the running frequency of the CPU executing the benchmark 31* Not subject to dynamic frequency scaling of the CPU 32 33For the time being we however advise usage of the Dhrystone benchmark. What 34above thus becomes: 35 36CPU capacities are obtained by running the Dhrystone benchmark on each CPU at 37max frequency (with caches enabled). The obtained DMIPS score is then divided 38by the frequency (in MHz) at which the benchmark has been run, so that 39DMIPS/MHz are obtained. Such values are then normalized w.r.t. the highest 40score obtained in the system. 41 42========================================== 433 - capacity-dmips-mhz 44========================================== 45 46capacity-dmips-mhz is an optional cpu node [1] property: u32 value 47representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the 48maximum frequency available to the cpu is then used to calculate the capacity 49value internally used by the kernel. 50 51capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu 52node, it has to be specified for every other cpu nodes, or the system will 53fall back to the default capacity value for every CPU. If cpufreq is not 54available, final capacities are calculated by directly using capacity-dmips- 55mhz values (normalized w.r.t. the highest value found while parsing the DT). 56 57=========================================== 584 - Examples 59=========================================== 60 61Example 1 (ARM 64-bit, 6-cpu system, two clusters): 62The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024) 63are 1024 and 578 for cluster0 and cluster1. Further normalization 64is done by the operating system based on cluster0@max-freq=1100 and 65cluster1@max-freq=850, final capacities are 1024 for cluster0 and 66446 for cluster1 (578*850/1100). 67 68cpus { 69 #address-cells = <2>; 70 #size-cells = <0>; 71 72 cpu-map { 73 cluster0 { 74 core0 { 75 cpu = <&A57_0>; 76 }; 77 core1 { 78 cpu = <&A57_1>; 79 }; 80 }; 81 82 cluster1 { 83 core0 { 84 cpu = <&A53_0>; 85 }; 86 core1 { 87 cpu = <&A53_1>; 88 }; 89 core2 { 90 cpu = <&A53_2>; 91 }; 92 core3 { 93 cpu = <&A53_3>; 94 }; 95 }; 96 }; 97 98 idle-states { 99 entry-method = "psci"; 100 101 CPU_SLEEP_0: cpu-sleep-0 { 102 compatible = "arm,idle-state"; 103 arm,psci-suspend-param = <0x0010000>; 104 local-timer-stop; 105 entry-latency-us = <100>; 106 exit-latency-us = <250>; 107 min-residency-us = <150>; 108 }; 109 110 CLUSTER_SLEEP_0: cluster-sleep-0 { 111 compatible = "arm,idle-state"; 112 arm,psci-suspend-param = <0x1010000>; 113 local-timer-stop; 114 entry-latency-us = <800>; 115 exit-latency-us = <700>; 116 min-residency-us = <2500>; 117 }; 118 }; 119 120 A57_0: cpu@0 { 121 compatible = "arm,cortex-a57"; 122 reg = <0x0 0x0>; 123 device_type = "cpu"; 124 enable-method = "psci"; 125 next-level-cache = <&A57_L2>; 126 clocks = <&scpi_dvfs 0>; 127 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; 128 capacity-dmips-mhz = <1024>; 129 }; 130 131 A57_1: cpu@1 { 132 compatible = "arm,cortex-a57"; 133 reg = <0x0 0x1>; 134 device_type = "cpu"; 135 enable-method = "psci"; 136 next-level-cache = <&A57_L2>; 137 clocks = <&scpi_dvfs 0>; 138 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; 139 capacity-dmips-mhz = <1024>; 140 }; 141 142 A53_0: cpu@100 { 143 compatible = "arm,cortex-a53"; 144 reg = <0x0 0x100>; 145 device_type = "cpu"; 146 enable-method = "psci"; 147 next-level-cache = <&A53_L2>; 148 clocks = <&scpi_dvfs 1>; 149 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; 150 capacity-dmips-mhz = <578>; 151 }; 152 153 A53_1: cpu@101 { 154 compatible = "arm,cortex-a53"; 155 reg = <0x0 0x101>; 156 device_type = "cpu"; 157 enable-method = "psci"; 158 next-level-cache = <&A53_L2>; 159 clocks = <&scpi_dvfs 1>; 160 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; 161 capacity-dmips-mhz = <578>; 162 }; 163 164 A53_2: cpu@102 { 165 compatible = "arm,cortex-a53"; 166 reg = <0x0 0x102>; 167 device_type = "cpu"; 168 enable-method = "psci"; 169 next-level-cache = <&A53_L2>; 170 clocks = <&scpi_dvfs 1>; 171 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; 172 capacity-dmips-mhz = <578>; 173 }; 174 175 A53_3: cpu@103 { 176 compatible = "arm,cortex-a53"; 177 reg = <0x0 0x103>; 178 device_type = "cpu"; 179 enable-method = "psci"; 180 next-level-cache = <&A53_L2>; 181 clocks = <&scpi_dvfs 1>; 182 cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; 183 capacity-dmips-mhz = <578>; 184 }; 185 186 A57_L2: l2-cache0 { 187 compatible = "cache"; 188 }; 189 190 A53_L2: l2-cache1 { 191 compatible = "cache"; 192 }; 193}; 194 195Example 2 (ARM 32-bit, 4-cpu system, two clusters, 196 cpus 0,1@1GHz, cpus 2,3@500MHz): 197capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first 198cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency) 199 200cpus { 201 #address-cells = <1>; 202 #size-cells = <0>; 203 204 cpu0: cpu@0 { 205 device_type = "cpu"; 206 compatible = "arm,cortex-a15"; 207 reg = <0>; 208 capacity-dmips-mhz = <2>; 209 }; 210 211 cpu1: cpu@1 { 212 device_type = "cpu"; 213 compatible = "arm,cortex-a15"; 214 reg = <1>; 215 capacity-dmips-mhz = <2>; 216 }; 217 218 cpu2: cpu@2 { 219 device_type = "cpu"; 220 compatible = "arm,cortex-a15"; 221 reg = <0x100>; 222 capacity-dmips-mhz = <1>; 223 }; 224 225 cpu3: cpu@3 { 226 device_type = "cpu"; 227 compatible = "arm,cortex-a15"; 228 reg = <0x101>; 229 capacity-dmips-mhz = <1>; 230 }; 231}; 232 233=========================================== 2345 - References 235=========================================== 236 237[1] ARM Linux Kernel documentation - CPUs bindings 238 Documentation/devicetree/bindings/arm/cpus.yaml