sysctrl.yaml (3448B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Hisilicon system controller 8 9maintainers: 10 - Wei Xu <xuwei5@hisilicon.com> 11 12description: | 13 The Hisilicon system controller is used on many Hisilicon boards, it can be 14 used to assist the slave core startup, reboot the system, etc. 15 16 There are some variants of the Hisilicon system controller, such as HiP01, 17 Hi3519, Hi6220 system controller, each of them is mostly compatible with the 18 Hisilicon system controller, but some same registers located at different 19 offset. In addition, the HiP01 system controller has some specific control 20 registers for HIP01 SoC family, such as slave core boot. 21 22 The compatible names of each system controller are as follows: 23 Hisilicon system controller --> hisilicon,sysctrl 24 HiP01 system controller --> hisilicon,hip01-sysctrl 25 Hi6220 system controller --> hisilicon,hi6220-sysctrl 26 Hi3519 system controller --> hisilicon,hi3519-sysctrl 27 28allOf: 29 - if: 30 properties: 31 compatible: 32 contains: 33 const: hisilicon,hi6220-sysctrl 34 then: 35 required: 36 - '#clock-cells' 37 38properties: 39 compatible: 40 oneOf: 41 - items: 42 - enum: 43 - hisilicon,sysctrl 44 - hisilicon,hi6220-sysctrl 45 - hisilicon,hi3519-sysctrl 46 - const: syscon 47 - items: 48 - const: hisilicon,hip01-sysctrl 49 - const: hisilicon,sysctrl 50 51 reg: 52 maxItems: 1 53 54 smp-offset: 55 description: | 56 offset in sysctrl for notifying slave cpu booting 57 cpu 1, reg; 58 cpu 2, reg + 0x4; 59 cpu 3, reg + 0x8; 60 If reg value is not zero, cpun exit wfi and go 61 $ref: /schemas/types.yaml#/definitions/uint32 62 63 resume-offset: 64 description: offset in sysctrl for notifying cpu0 when resume 65 $ref: /schemas/types.yaml#/definitions/uint32 66 67 reboot-offset: 68 description: offset in sysctrl for system reboot 69 $ref: /schemas/types.yaml#/definitions/uint32 70 71 '#clock-cells': 72 const: 1 73 74 '#reset-cells': 75 const: 1 76 77 '#address-cells': 78 const: 1 79 80 '#size-cells': 81 const: 1 82 83 ranges: true 84 85required: 86 - compatible 87 - reg 88 89additionalProperties: 90 type: object 91 92examples: 93 - | 94 /* Hisilicon system controller */ 95 system-controller@802000 { 96 compatible = "hisilicon,sysctrl", "syscon"; 97 #address-cells = <1>; 98 #size-cells = <1>; 99 ranges = <0 0x802000 0x1000>; 100 reg = <0x802000 0x1000>; 101 102 smp-offset = <0x31c>; 103 resume-offset = <0x308>; 104 reboot-offset = <0x4>; 105 106 clock: clock@0 { 107 compatible = "hisilicon,hi3620-clock"; 108 reg = <0 0x10000>; 109 #clock-cells = <1>; 110 }; 111 }; 112 113 /* HiP01 system controller */ 114 system-controller@10000000 { 115 compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; 116 reg = <0x10000000 0x1000>; 117 reboot-offset = <0x4>; 118 }; 119 120 /* Hi6220 system controller */ 121 system-controller@f7030000 { 122 compatible = "hisilicon,hi6220-sysctrl", "syscon"; 123 reg = <0xf7030000 0x2000>; 124 #clock-cells = <1>; 125 }; 126 127 /* Hi3519 system controller */ 128 system-controller@12010000 { 129 compatible = "hisilicon,hi3519-sysctrl", "syscon"; 130 reg = <0x12010000 0x1000>; 131 }; 132...