l2c2x0.yaml (7874B)
1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/arm/l2c2x0.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ARM L2 Cache Controller 8 9maintainers: 10 - Rob Herring <robh@kernel.org> 11 12description: |+ 13 ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/ 14 PL220/PL310 and variants) based level 2 cache controller. All these various 15 implementations of the L2 cache controller have compatible programming 16 models (Note 1). Some of the properties that are just prefixed "cache-*" are 17 taken from section 3.7.3 of the Devicetree Specification which can be found 18 at: 19 https://www.devicetree.org/specifications/ 20 21 Note 1: The description in this document doesn't apply to integrated L2 22 cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These 23 integrated L2 controllers are assumed to be all preconfigured by 24 early secure boot code. Thus no need to deal with their configuration 25 in the kernel at all. 26 27allOf: 28 - $ref: /schemas/cache-controller.yaml# 29 30properties: 31 compatible: 32 oneOf: 33 - enum: 34 - arm,pl310-cache 35 - arm,l220-cache 36 - arm,l210-cache 37 # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" 38 - bcm,bcm11351-a2-pl310-cache 39 # For Broadcom bcm11351 chipset where an 40 # offset needs to be added to the address before passing down to the L2 41 # cache controller 42 - brcm,bcm11351-a2-pl310-cache 43 # Marvell Controller designed to be 44 # compatible with the ARM one, with system cache mode (meaning 45 # maintenance operations on L1 are broadcasted to the L2 and L2 46 # performs the same operation). 47 - marvell,aurora-system-cache 48 # Marvell Controller designed to be 49 # compatible with the ARM one with outer cache mode. 50 - marvell,aurora-outer-cache 51 - items: 52 # Marvell Tauros3 cache controller, compatible 53 # with arm,pl310-cache controller. 54 - const: marvell,tauros3-cache 55 - const: arm,pl310-cache 56 57 cache-level: 58 const: 2 59 60 cache-unified: true 61 cache-size: true 62 cache-sets: true 63 cache-block-size: true 64 cache-line-size: true 65 66 reg: 67 maxItems: 1 68 69 arm,data-latency: 70 description: Cycles of latency for Data RAM accesses. Specifies 3 cells of 71 read, write and setup latencies. Minimum valid values are 1. Controllers 72 without setup latency control should use a value of 0. 73 $ref: /schemas/types.yaml#/definitions/uint32-array 74 minItems: 2 75 maxItems: 3 76 items: 77 minimum: 0 78 maximum: 8 79 80 arm,tag-latency: 81 description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of 82 read, write and setup latencies. Controllers without setup latency control 83 should use 0. Controllers without separate read and write Tag RAM latency 84 values should only use the first cell. 85 $ref: /schemas/types.yaml#/definitions/uint32-array 86 minItems: 1 87 maxItems: 3 88 items: 89 minimum: 0 90 maximum: 8 91 92 arm,dirty-latency: 93 description: Cycles of latency for Dirty RAMs. This is a single cell. 94 $ref: /schemas/types.yaml#/definitions/uint32 95 minimum: 1 96 maximum: 8 97 98 arm,filter-ranges: 99 description: <start length> Starting address and length of window to 100 filter. Addresses in the filter window are directed to the M1 port. Other 101 addresses will go to the M0 port. 102 $ref: /schemas/types.yaml#/definitions/uint32-array 103 items: 104 minItems: 2 105 maxItems: 2 106 107 arm,io-coherent: 108 description: indicates that the system is operating in an hardware 109 I/O coherent mode. Valid only when the arm,pl310-cache compatible 110 string is used. 111 type: boolean 112 113 interrupts: 114 # Either a single combined interrupt or up to 9 individual interrupts 115 minItems: 1 116 maxItems: 9 117 118 cache-id-part: 119 description: cache id part number to be used if it is not present 120 on hardware 121 $ref: /schemas/types.yaml#/definitions/uint32 122 123 wt-override: 124 description: If present then L2 is forced to Write through mode 125 type: boolean 126 127 arm,double-linefill: 128 description: Override double linefill enable setting. Enable if 129 non-zero, disable if zero. 130 $ref: /schemas/types.yaml#/definitions/uint32 131 enum: [0, 1] 132 133 arm,double-linefill-incr: 134 description: Override double linefill on INCR read. Enable 135 if non-zero, disable if zero. 136 $ref: /schemas/types.yaml#/definitions/uint32 137 enum: [0, 1] 138 139 arm,double-linefill-wrap: 140 description: Override double linefill on WRAP read. Enable 141 if non-zero, disable if zero. 142 $ref: /schemas/types.yaml#/definitions/uint32 143 enum: [0, 1] 144 145 arm,prefetch-drop: 146 description: Override prefetch drop enable setting. Enable if non-zero, 147 disable if zero. 148 $ref: /schemas/types.yaml#/definitions/uint32 149 enum: [0, 1] 150 151 arm,prefetch-offset: 152 description: Override prefetch offset value. 153 $ref: /schemas/types.yaml#/definitions/uint32 154 enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31] 155 156 arm,shared-override: 157 description: The default behavior of the L220 or PL310 cache 158 controllers with respect to the shareable attribute is to transform "normal 159 memory non-cacheable transactions" into "cacheable no allocate" (for reads) 160 or "write through no write allocate" (for writes). 161 On systems where this may cause DMA buffer corruption, this property must 162 be specified to indicate that such transforms are precluded. 163 type: boolean 164 165 arm,parity-enable: 166 description: enable parity checking on the L2 cache (L220 or PL310). 167 type: boolean 168 169 arm,parity-disable: 170 description: disable parity checking on the L2 cache (L220 or PL310). 171 type: boolean 172 173 marvell,ecc-enable: 174 description: enable ECC protection on the L2 cache 175 type: boolean 176 177 arm,outer-sync-disable: 178 description: disable the outer sync operation on the L2 cache. 179 Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that 180 will randomly hang unless outer sync operations are disabled. 181 type: boolean 182 183 prefetch-data: 184 description: | 185 Data prefetch. Value: <0> (forcibly disable), <1> 186 (forcibly enable), property absent (retain settings set by firmware) 187 $ref: /schemas/types.yaml#/definitions/uint32 188 enum: [0, 1] 189 190 prefetch-instr: 191 description: | 192 Instruction prefetch. Value: <0> (forcibly disable), 193 <1> (forcibly enable), property absent (retain settings set by 194 firmware) 195 $ref: /schemas/types.yaml#/definitions/uint32 196 enum: [0, 1] 197 198 arm,dynamic-clock-gating: 199 description: | 200 L2 dynamic clock gating. Value: <0> (forcibly 201 disable), <1> (forcibly enable), property absent (OS specific behavior, 202 preferably retain firmware settings) 203 $ref: /schemas/types.yaml#/definitions/uint32 204 enum: [0, 1] 205 206 arm,standby-mode: 207 description: L2 standby mode enable. Value <0> (forcibly disable), 208 <1> (forcibly enable), property absent (OS specific behavior, 209 preferably retain firmware settings) 210 $ref: /schemas/types.yaml#/definitions/uint32 211 enum: [0, 1] 212 213 arm,early-bresp-disable: 214 description: Disable the CA9 optimization Early BRESP (PL310) 215 type: boolean 216 217 arm,full-line-zero-disable: 218 description: Disable the CA9 optimization Full line of zero 219 write (PL310) 220 type: boolean 221 222required: 223 - compatible 224 - cache-unified 225 - reg 226 227additionalProperties: false 228 229examples: 230 - | 231 cache-controller@fff12000 { 232 compatible = "arm,pl310-cache"; 233 reg = <0xfff12000 0x1000>; 234 arm,data-latency = <1 1 1>; 235 arm,tag-latency = <2 2 2>; 236 arm,filter-ranges = <0x80000000 0x8000000>; 237 cache-unified; 238 cache-level = <2>; 239 interrupts = <45>; 240 }; 241 242...