maxim,max77686.txt (2807B)
1Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block 2 3This is a part of device tree bindings of MAX77686/MAX77802/MAX77620 4multi-function device. More information can be found in MFD DT binding 5doc as follows: 6 bindings/mfd/max77686.txt for MAX77686 and 7 bindings/mfd/max77802.txt for MAX77802 and 8 bindings/mfd/max77620.txt for MAX77620. 9 10The MAX77686 contains three 32.768khz clock outputs that can be controlled 11(gated/ungated) over I2C. Clocks are defined as preprocessor macros in 12dt-bindings/clock/maxim,max77686.h. 13 14 15The MAX77802 contains two 32.768khz clock outputs that can be controlled 16(gated/ungated) over I2C. Clocks are defined as preprocessor macros in 17dt-bindings/clock/maxim,max77802.h. 18 19The MAX77686 contains one 32.768khz clock outputs that can be controlled 20(gated/ungated) over I2C. Clocks are defined as preprocessor macros in 21dt-bindings/clock/maxim,max77620.h. 22 23Following properties should be presend in main device node of the MFD chip. 24 25Required properties: 26 27- #clock-cells: from common clock binding; shall be set to 1. 28 29Optional properties: 30- clock-output-names: From common clock binding. 31 32Each clock is assigned an identifier and client nodes can use this identifier 33to specify the clock which they consume. Following indices are allowed: 34 - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620) 35 - 1: 32khz_cp clock (max77686, max77802), 36 - 2: 32khz_pmic clock (max77686). 37 38Clocks are defined as preprocessor macros in above dt-binding header for 39respective chips. 40 41Example: 42 431. With MAX77686: 44 45#include <dt-bindings/clock/maxim,max77686.h> 46/* ... */ 47 48 Node of the MFD chip 49 max77686: max77686@9 { 50 compatible = "maxim,max77686"; 51 interrupt-parent = <&wakeup_eint>; 52 interrupts = <26 IRQ_TYPE_LEVEL_LOW>; 53 reg = <0x09>; 54 #clock-cells = <1>; 55 56 /* ... */ 57 }; 58 59 Clock consumer node 60 61 foo@0 { 62 compatible = "bar,foo"; 63 /* ... */ 64 clock-names = "my-clock"; 65 clocks = <&max77686 MAX77686_CLK_PMIC>; 66 }; 67 682. With MAX77802: 69 70#include <dt-bindings/clock/maxim,max77802.h> 71/* ... */ 72 73 Node of the MFD chip 74 max77802: max77802@9 { 75 compatible = "maxim,max77802"; 76 interrupt-parent = <&wakeup_eint>; 77 interrupts = <26 IRQ_TYPE_LEVEL_LOW>; 78 reg = <0x09>; 79 #clock-cells = <1>; 80 81 /* ... */ 82 }; 83 84 Clock consumer node 85 86 foo@0 { 87 compatible = "bar,foo"; 88 /* ... */ 89 clock-names = "my-clock"; 90 clocks = <&max77802 MAX77802_CLK_32K_AP>; 91 }; 92 93 943. With MAX77620: 95 96#include <dt-bindings/clock/maxim,max77620.h> 97/* ... */ 98 99 Node of the MFD chip 100 max77620: max77620@3c { 101 compatible = "maxim,max77620"; 102 reg = <0x3c>; 103 #clock-cells = <1>; 104 /* ... */ 105 }; 106 107 Clock consumer node 108 109 foo@0 { 110 compatible = "bar,foo"; 111 /* ... */ 112 clock-names = "my-clock"; 113 clocks = <&max77620 MAX77620_CLK_32K_OUT0>; 114 };