pistachio-clock.txt (4528B)
1Imagination Technologies Pistachio SoC clock controllers 2======================================================== 3 4Pistachio has four clock controllers (core clock, peripheral clock, peripheral 5general control, and top general control) which are instantiated individually 6from the device-tree. 7 8External clocks: 9---------------- 10 11There are three external inputs to the clock controllers which should be 12defined with the following clock-output-names: 13- "xtal": External 52Mhz oscillator (required) 14- "audio_clk_in": Alternate audio reference clock (optional) 15- "enet_clk_in": Alternate ethernet PHY clock (optional) 16 17Core clock controller: 18---------------------- 19 20The core clock controller generates clocks for the CPU, RPU (WiFi + BT 21co-processor), audio, and several peripherals. 22 23Required properties: 24- compatible: Must be "img,pistachio-clk". 25- reg: Must contain the base address and length of the core clock controller. 26- #clock-cells: Must be 1. The single cell is the clock identifier. 27 See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. 28- clocks: Must contain an entry for each clock in clock-names. 29- clock-names: Must include "xtal" (see "External clocks") and 30 "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the 31 top-level general control. 32 33Example: 34 clk_core: clock-controller@18144000 { 35 compatible = "img,pistachio-clk"; 36 reg = <0x18144000 0x800>; 37 clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>, 38 <&cr_top EXT_CLK_ENET_IN>; 39 clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate"; 40 41 #clock-cells = <1>; 42 }; 43 44Peripheral clock controller: 45---------------------------- 46 47The peripheral clock controller generates clocks for the DDR, ROM, and other 48peripherals. The peripheral system clock ("periph_sys") generated by the core 49clock controller is the input clock to the peripheral clock controller. 50 51Required properties: 52- compatible: Must be "img,pistachio-periph-clk". 53- reg: Must contain the base address and length of the peripheral clock 54 controller. 55- #clock-cells: Must be 1. The single cell is the clock identifier. 56 See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. 57- clocks: Must contain an entry for each clock in clock-names. 58- clock-names: Must include "periph_sys", the peripheral system clock generated 59 by the core clock controller. 60 61Example: 62 clk_periph: clock-controller@18144800 { 63 compatible = "img,pistachio-clk-periph"; 64 reg = <0x18144800 0x800>; 65 clocks = <&clk_core CLK_PERIPH_SYS>; 66 clock-names = "periph_sys"; 67 68 #clock-cells = <1>; 69 }; 70 71Peripheral general control: 72--------------------------- 73 74The peripheral general control block generates system interface clocks and 75resets for various peripherals. It also contains miscellaneous peripheral 76control registers. The system clock ("sys") generated by the peripheral clock 77controller is the input clock to the system clock controller. 78 79Required properties: 80- compatible: Must include "img,pistachio-periph-cr" and "syscon". 81- reg: Must contain the base address and length of the peripheral general 82 control registers. 83- #clock-cells: Must be 1. The single cell is the clock identifier. 84 See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. 85- clocks: Must contain an entry for each clock in clock-names. 86- clock-names: Must include "sys", the system clock generated by the peripheral 87 clock controller. 88 89Example: 90 cr_periph: syscon@18144800 { 91 compatible = "img,pistachio-cr-periph", "syscon"; 92 reg = <0x18148000 0x1000>; 93 clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>; 94 clock-names = "sys"; 95 96 #clock-cells = <1>; 97 }; 98 99Top-level general control: 100-------------------------- 101 102The top-level general control block contains miscellaneous control registers and 103gates for the external clocks "audio_clk_in" and "enet_clk_in". 104 105Required properties: 106- compatible: Must include "img,pistachio-cr-top" and "syscon". 107- reg: Must contain the base address and length of the top-level 108 control registers. 109- clocks: Must contain an entry for each clock in clock-names. 110- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see 111 "External clocks"). 112- #clock-cells: Must be 1. The single cell is the clock identifier. 113 See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. 114 115Example: 116 cr_top: syscon@18144800 { 117 compatible = "img,pistachio-cr-top", "syscon"; 118 reg = <0x18149000 0x200>; 119 clocks = <&audio_refclk>, <&ext_enet_in>; 120 clock-names = "audio_clk_in", "enet_clk_in"; 121 122 #clock-cells = <1>; 123 };