apll.txt (1820B)
1Binding for Texas Instruments APLL clock. 2 3Binding status: Unstable - ABI compatibility may be broken in the future 4 5This binding uses the common clock binding[1]. It assumes a 6register-mapped APLL with usually two selectable input clocks 7(reference clock and bypass clock), with analog phase locked 8loop logic for multiplying the input clock to a desired output 9clock. This clock also typically supports different operation 10modes (locked, low power stop etc.) APLL mostly behaves like 11a subtype of a DPLL [2], although a simplified one at that. 12 13[1] Documentation/devicetree/bindings/clock/clock-bindings.txt 14[2] Documentation/devicetree/bindings/clock/ti/dpll.txt 15 16Required properties: 17- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock" 18- #clock-cells : from common clock binding; shall be set to 0. 19- clocks : link phandles of parent clocks (clk-ref and clk-bypass) 20- reg : address and length of the register set for controlling the APLL. 21 It contains the information of registers in the following order: 22 "control" - contains the control register offset 23 "idlest" - contains the idlest register offset 24 "autoidle" - contains the autoidle register offset (OMAP2 only) 25- ti,clock-frequency : static clock frequency for the clock (OMAP2 only) 26- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only) 27- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only) 28 29Examples: 30 apll_pcie_ck: apll_pcie_ck { 31 #clock-cells = <0>; 32 clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; 33 reg = <0x021c>, <0x0220>; 34 compatible = "ti,dra7-apll-clock"; 35 }; 36 37 apll96_ck: apll96_ck { 38 #clock-cells = <0>; 39 compatible = "ti,omap2-apll-clock"; 40 clocks = <&sys_ck>; 41 ti,bit-shift = <2>; 42 ti,idlest-shift = <8>; 43 ti,clock-frequency = <96000000>; 44 reg = <0x0500>, <0x0530>, <0x0520>; 45 };