psc.txt (2536B)
1Binding for TI DaVinci Power Sleep Controller (PSC) 2 3The PSC provides power management, clock gating and reset functionality. It is 4primarily used for clocking. 5 6Required properties: 7- compatible: shall be one of: 8 - "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX 9 - "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX 10- reg: physical base address and size of the controller's register area 11- #clock-cells: from common clock binding; shall be set to 1 12- #power-domain-cells: from generic power domain binding; shall be set to 1. 13- clocks: phandles to clocks corresponding to the clock-names property 14- clock-names: list of parent clock names - depends on compatible value 15 - for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2", 16 "pll0_sysclk4", "pll0_sysclk6", "async1" 17 - for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3" 18 19Optional properties: 20- #reset-cells: from reset binding; shall be set to 1 - only applicable when 21 at least one local domain provides a local reset. 22 23Consumers: 24 25 Clock, power domain and reset consumers shall use the local power domain 26 module ID (LPSC) as the index corresponding to the clock cell. Refer to 27 the device-specific datasheet to find these numbers. NB: Most local 28 domains only provide a clock/power domain and not a reset. 29 30Examples: 31 32 psc0: clock-controller@10000 { 33 compatible = "ti,da850-psc0"; 34 reg = <0x10000 0x1000>; 35 #clock-cells = <1>; 36 #power-domain-cells = <1>; 37 #reset-cells = <1>; 38 clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, 39 <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>; 40 clock_names = "pll0_sysclk1", "pll0_sysclk2", 41 "pll0_sysclk4", "pll0_sysclk6", "async1"; 42 }; 43 psc1: clock-controller@227000 { 44 compatible = "ti,da850-psc1"; 45 reg = <0x227000 0x1000>; 46 #clock-cells = <1>; 47 #power-domain-cells = <1>; 48 clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>; 49 clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3"; 50 }; 51 52 /* consumer */ 53 dsp: dsp@11800000 { 54 compatible = "ti,da850-dsp"; 55 reg = <0x11800000 0x40000>, 56 <0x11e00000 0x8000>, 57 <0x11f00000 0x8000>, 58 <0x01c14044 0x4>, 59 <0x01c14174 0x8>; 60 reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; 61 interrupt-parent = <&intc>; 62 interrupts = <28>; 63 clocks = <&psc0 15>; 64 power-domains = <&psc0 15>; 65 resets = <&psc0 15>; 66 }; 67 68Also see: 69- Documentation/devicetree/bindings/clock/clock-bindings.txt 70- Documentation/devicetree/bindings/power/power-domain.yaml 71- Documentation/devicetree/bindings/reset/reset.txt