dpll.txt (3835B)
1Binding for Texas Instruments DPLL clock. 2 3Binding status: Unstable - ABI compatibility may be broken in the future 4 5This binding uses the common clock binding[1]. It assumes a 6register-mapped DPLL with usually two selectable input clocks 7(reference clock and bypass clock), with digital phase locked 8loop logic for multiplying the input clock to a desired output 9clock. This clock also typically supports different operation 10modes (locked, low power stop etc.) This binding has several 11sub-types, which effectively result in slightly different setup 12for the actual DPLL clock. 13 14[1] Documentation/devicetree/bindings/clock/clock-bindings.txt 15 16Required properties: 17- compatible : shall be one of: 18 "ti,omap3-dpll-clock", 19 "ti,omap3-dpll-core-clock", 20 "ti,omap3-dpll-per-clock", 21 "ti,omap3-dpll-per-j-type-clock", 22 "ti,omap4-dpll-clock", 23 "ti,omap4-dpll-x2-clock", 24 "ti,omap4-dpll-core-clock", 25 "ti,omap4-dpll-m4xen-clock", 26 "ti,omap4-dpll-j-type-clock", 27 "ti,omap5-mpu-dpll-clock", 28 "ti,am3-dpll-no-gate-clock", 29 "ti,am3-dpll-j-type-clock", 30 "ti,am3-dpll-no-gate-j-type-clock", 31 "ti,am3-dpll-clock", 32 "ti,am3-dpll-core-clock", 33 "ti,am3-dpll-x2-clock", 34 "ti,omap2-dpll-core-clock", 35 36- #clock-cells : from common clock binding; shall be set to 0. 37- clocks : link phandles of parent clocks, first entry lists reference clock 38 and second entry bypass clock 39- reg : offsets for the register set for controlling the DPLL. 40 Registers are listed in following order: 41 "control" - contains the control register base address 42 "idlest" - contains the idle status register base address 43 "mult-div1" - contains the multiplier / divider register base address 44 "autoidle" - contains the autoidle register base address (optional) 45 "ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains 46 the frequency spreading register base address (optional) 47 "ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains 48 the modulation frequency register base address 49 (optional) 50 ti,am3-* dpll types do not have autoidle register 51 ti,omap2-* dpll type does not support idlest / autoidle registers 52 53Optional properties: 54- DPLL mode setting - defining any one or more of the following overrides 55 default setting. 56 - ti,low-power-stop : DPLL supports low power stop mode, gating output 57 - ti,low-power-bypass : DPLL output matches rate of parent bypass clock 58 - ti,lock : DPLL locks in programmed rate 59 - ti,min-div : the minimum divisor to start from to round the DPLL 60 target rate 61 - ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency 62 spreading in permille (10th of a percent) 63 - ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread 64 spectrum modulation frequency 65 - ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean 66 to enable the downspread feature 67 68Examples: 69 dpll_core_ck: dpll_core_ck@44e00490 { 70 #clock-cells = <0>; 71 compatible = "ti,omap4-dpll-core-clock"; 72 clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; 73 reg = <0x490>, <0x45c>, <0x488>, <0x468>; 74 }; 75 76 dpll2_ck: dpll2_ck@48004004 { 77 #clock-cells = <0>; 78 compatible = "ti,omap3-dpll-clock"; 79 clocks = <&sys_ck>, <&dpll2_fck>; 80 ti,low-power-stop; 81 ti,low-power-bypass; 82 ti,lock; 83 reg = <0x4>, <0x24>, <0x34>, <0x40>; 84 }; 85 86 dpll_core_ck: dpll_core_ck@44e00490 { 87 #clock-cells = <0>; 88 compatible = "ti,am3-dpll-core-clock"; 89 clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; 90 reg = <0x90>, <0x5c>, <0x68>; 91 }; 92 93 dpll_ck: dpll_ck { 94 #clock-cells = <0>; 95 compatible = "ti,omap2-dpll-core-clock"; 96 clocks = <&sys_ck>, <&sys_ck>; 97 reg = <0x0500>, <0x0540>; 98 }; 99 100 dpll_disp_ck: dpll_disp_ck { 101 #clock-cells = <0>; 102 compatible = "ti,am3-dpll-no-gate-clock"; 103 clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; 104 reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; 105 };