xgene.txt (4413B)
1Device Tree Clock bindings for APM X-Gene 2 3This binding uses the common clock binding[1]. 4 5[1] Documentation/devicetree/bindings/clock/clock-bindings.txt 6 7Required properties: 8- compatible : shall be one of the following: 9 "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock 10 "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock 11 "apm,xgene-pmd-clock" - for a X-Gene PMD clock 12 "apm,xgene-device-clock" - for a X-Gene device clock 13 "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock 14 "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock 15 16Required properties for SoC or PCP PLL clocks: 17- reg : shall be the physical PLL register address for the pll clock. 18- clocks : shall be the input parent clock phandle for the clock. This should 19 be the reference clock. 20- #clock-cells : shall be set to 1. 21- clock-output-names : shall be the name of the PLL referenced by derive 22 clock. 23Optional properties for PLL clocks: 24- clock-names : shall be the name of the PLL. If missing, use the device name. 25 26Required properties for PMD clocks: 27- reg : shall be the physical register address for the pmd clock. 28- clocks : shall be the input parent clock phandle for the clock. 29- #clock-cells : shall be set to 1. 30- clock-output-names : shall be the name of the clock referenced by derive 31 clock. 32Optional properties for PLL clocks: 33- clock-names : shall be the name of the clock. If missing, use the device name. 34 35Required properties for device clocks: 36- reg : shall be a list of address and length pairs describing the CSR 37 reset and/or the divider. Either may be omitted, but at least 38 one must be present. 39 - reg-names : shall be a string list describing the reg resource. This 40 may include "csr-reg" and/or "div-reg". If this property 41 is not present, the reg property is assumed to describe 42 only "csr-reg". 43- clocks : shall be the input parent clock phandle for the clock. 44- #clock-cells : shall be set to 1. 45- clock-output-names : shall be the name of the device referenced. 46Optional properties for device clocks: 47- clock-names : shall be the name of the device clock. If missing, use the 48 device name. 49- csr-offset : Offset to the CSR reset register from the reset address base. 50 Default is 0. 51- csr-mask : CSR reset mask bit. Default is 0xF. 52- enable-offset : Offset to the enable register from the reset address base. 53 Default is 0x8. 54- enable-mask : CSR enable mask bit. Default is 0xF. 55- divider-offset : Offset to the divider CSR register from the divider base. 56 Default is 0x0. 57- divider-width : Width of the divider register. Default is 0. 58- divider-shift : Bit shift of the divider register. Default is 0. 59 60For example: 61 62 pcppll: pcppll@17000100 { 63 compatible = "apm,xgene-pcppll-clock"; 64 #clock-cells = <1>; 65 clocks = <&refclk 0>; 66 clock-names = "pcppll"; 67 reg = <0x0 0x17000100 0x0 0x1000>; 68 clock-output-names = "pcppll"; 69 type = <0>; 70 }; 71 72 pmd0clk: pmd0clk@7e200200 { 73 compatible = "apm,xgene-pmd-clock"; 74 #clock-cells = <1>; 75 clocks = <&pmdpll 0>; 76 reg = <0x0 0x7e200200 0x0 0x10>; 77 clock-output-names = "pmd0clk"; 78 }; 79 80 socpll: socpll@17000120 { 81 compatible = "apm,xgene-socpll-clock"; 82 #clock-cells = <1>; 83 clocks = <&refclk 0>; 84 clock-names = "socpll"; 85 reg = <0x0 0x17000120 0x0 0x1000>; 86 clock-output-names = "socpll"; 87 type = <1>; 88 }; 89 90 qmlclk: qmlclk { 91 compatible = "apm,xgene-device-clock"; 92 #clock-cells = <1>; 93 clocks = <&socplldiv2 0>; 94 clock-names = "qmlclk"; 95 reg = <0x0 0x1703C000 0x0 0x1000>; 96 reg-name = "csr-reg"; 97 clock-output-names = "qmlclk"; 98 }; 99 100 ethclk: ethclk { 101 compatible = "apm,xgene-device-clock"; 102 #clock-cells = <1>; 103 clocks = <&socplldiv2 0>; 104 clock-names = "ethclk"; 105 reg = <0x0 0x17000000 0x0 0x1000>; 106 reg-names = "div-reg"; 107 divider-offset = <0x238>; 108 divider-width = <0x9>; 109 divider-shift = <0x0>; 110 clock-output-names = "ethclk"; 111 }; 112 113 apbclk: apbclk { 114 compatible = "apm,xgene-device-clock"; 115 #clock-cells = <1>; 116 clocks = <&ahbclk 0>; 117 clock-names = "apbclk"; 118 reg = <0x0 0x1F2AC000 0x0 0x1000 119 0x0 0x1F2AC000 0x0 0x1000>; 120 reg-names = "csr-reg", "div-reg"; 121 csr-offset = <0x0>; 122 csr-mask = <0x200>; 123 enable-offset = <0x8>; 124 enable-mask = <0x200>; 125 divider-offset = <0x10>; 126 divider-width = <0x2>; 127 divider-shift = <0x0>; 128 flags = <0x8>; 129 clock-output-names = "apbclk"; 130 }; 131