cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

analogix,anx7625.yaml (5042B)

      1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
      2# Copyright 2019 Analogix Semiconductor, Inc.
      3%YAML 1.2
      4---
      5$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
      6$schema: "http://devicetree.org/meta-schemas/core.yaml#"
      7
      8title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
      9
     10maintainers:
     11  - Xin Ji <xji@analogixsemi.com>
     12
     13description: |
     14  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
     15  designed for portable devices.
     16
     17properties:
     18  compatible:
     19    items:
     20      - const: analogix,anx7625
     21
     22  reg:
     23    maxItems: 1
     24
     25  interrupts:
     26    description: used for interrupt pin B8.
     27    maxItems: 1
     28
     29  enable-gpios:
     30    description: used for power on chip control, POWER_EN pin D2.
     31    maxItems: 1
     32
     33  reset-gpios:
     34    description: used for reset chip control, RESET_N pin B7.
     35    maxItems: 1
     36
     37  vdd10-supply:
     38    description: Regulator that provides the supply 1.0V power.
     39
     40  vdd18-supply:
     41    description: Regulator that provides the supply 1.8V power.
     42
     43  vdd33-supply:
     44    description: Regulator that provides the supply 3.3V power.
     45
     46  analogix,lane0-swing:
     47    $ref: /schemas/types.yaml#/definitions/uint8-array
     48    minItems: 1
     49    maxItems: 20
     50    description:
     51      an array of swing register setting for DP tx lane0 PHY.
     52      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
     53      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
     54      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
     55      [Swing control] setting.
     56      Registers 0~9, bit 3:0 is [Boost control], these bits control
     57      post cursor manual, increase the [Boost control] to increase
     58      Pre-emphasis value.
     59      Registers 0~9, bit 6:4 is [Swing control], these bits control
     60      swing manual, increase [Swing control] setting to add Vp-p value
     61      for each Swing, Pre.
     62      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
     63      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
     64      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
     65      [R Termination control] setting.
     66      Registers 10~19, bit 4:0 is [R select control], these bits are
     67      compensation manual, increase it can enhance IO driven strength
     68      and Vp-p.
     69      Registers 10~19, bit 5:6 is [R termination control], these bits
     70      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
     71      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
     72
     73  analogix,lane1-swing:
     74    $ref: /schemas/types.yaml#/definitions/uint8-array
     75    minItems: 1
     76    maxItems: 20
     77    description:
     78      an array of swing register setting for DP tx lane1 PHY.
     79      DP TX lane1 swing register setting same with lane0
     80      swing, please refer lane0-swing property description.
     81
     82  analogix,audio-enable:
     83    type: boolean
     84    description: let the driver enable audio HDMI codec function or not.
     85
     86  aux-bus:
     87    $ref: /schemas/display/dp-aux-bus.yaml#
     88
     89  ports:
     90    $ref: /schemas/graph.yaml#/properties/ports
     91
     92    properties:
     93      port@0:
     94        $ref: /schemas/graph.yaml#/$defs/port-base
     95        unevaluatedProperties: false
     96        description:
     97          Video port for MIPI DSI input.
     98
     99      port@1:
    100        $ref: /schemas/graph.yaml#/properties/port
    101        description:
    102          Video port for panel or connector.
    103
    104    required:
    105      - port@0
    106      - port@1
    107
    108required:
    109  - compatible
    110  - reg
    111  - vdd10-supply
    112  - vdd18-supply
    113  - vdd33-supply
    114  - ports
    115
    116additionalProperties: false
    117
    118examples:
    119  - |
    120    #include <dt-bindings/gpio/gpio.h>
    121
    122    i2c0 {
    123        #address-cells = <1>;
    124        #size-cells = <0>;
    125
    126        encoder@58 {
    127            compatible = "analogix,anx7625";
    128            reg = <0x58>;
    129            enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
    130            reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
    131            vdd10-supply = <&pp1000_mipibrdg>;
    132            vdd18-supply = <&pp1800_mipibrdg>;
    133            vdd33-supply = <&pp3300_mipibrdg>;
    134            analogix,audio-enable;
    135            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
    136            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
    137
    138            ports {
    139                #address-cells = <1>;
    140                #size-cells = <0>;
    141
    142                mipi2dp_bridge_in: port@0 {
    143                    reg = <0>;
    144                    anx7625_in: endpoint {
    145                        remote-endpoint = <&mipi_dsi>;
    146                    };
    147                };
    148
    149                mipi2dp_bridge_out: port@1 {
    150                    reg = <1>;
    151                    anx7625_out: endpoint {
    152                        remote-endpoint = <&panel_in>;
    153                    };
    154                };
    155            };
    156
    157            aux-bus {
    158                panel {
    159                    compatible = "innolux,n125hce-gn1";
    160                    power-supply = <&pp3300_disp_x>;
    161                    backlight = <&backlight_lcd0>;
    162
    163                    port {
    164                        panel_in: endpoint {
    165                            remote-endpoint = <&anx7625_out>;
    166                        };
    167                    };
    168                };
    169            };
    170        };
    171    };