cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

lontium,lt9211.yaml (2649B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
      8
      9maintainers:
     10  - Marek Vasut <marex@denx.de>
     11
     12description: |
     13  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
     14  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
     15
     16properties:
     17  compatible:
     18    enum:
     19      - lontium,lt9211
     20
     21  reg:
     22    maxItems: 1
     23
     24  interrupts:
     25    maxItems: 1
     26
     27  reset-gpios:
     28    maxItems: 1
     29    description: GPIO connected to active high RESET pin.
     30
     31  vccio-supply:
     32    description: Regulator for 1.8V IO power.
     33
     34  ports:
     35    $ref: /schemas/graph.yaml#/properties/ports
     36
     37    properties:
     38      port@0:
     39        $ref: /schemas/graph.yaml#/properties/port
     40        description:
     41          Primary MIPI DSI port-1 for MIPI input or
     42          LVDS port-1 for LVDS input or DPI input.
     43
     44      port@1:
     45        $ref: /schemas/graph.yaml#/properties/port
     46        description:
     47          Additional MIPI port-2 for MIPI input or LVDS port-2
     48          for LVDS input. Used in combination with primary
     49          port-1 to drive higher resolution displays
     50
     51      port@2:
     52        $ref: /schemas/graph.yaml#/properties/port
     53        description:
     54          Primary MIPI DSI port-1 for MIPI output or
     55          LVDS port-1 for LVDS output or DPI output.
     56
     57      port@3:
     58        $ref: /schemas/graph.yaml#/properties/port
     59        description:
     60          Additional MIPI port-2 for MIPI output or LVDS port-2
     61          for LVDS output. Used in combination with primary
     62          port-1 to drive higher resolution displays.
     63
     64    required:
     65      - port@0
     66      - port@2
     67
     68required:
     69  - compatible
     70  - reg
     71  - vccio-supply
     72  - ports
     73
     74additionalProperties: false
     75
     76examples:
     77  - |
     78    #include <dt-bindings/gpio/gpio.h>
     79    #include <dt-bindings/interrupt-controller/irq.h>
     80
     81    i2c {
     82      #address-cells = <1>;
     83      #size-cells = <0>;
     84
     85      hdmi-bridge@3b {
     86        compatible = "lontium,lt9211";
     87        reg = <0x3b>;
     88
     89        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
     90        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
     91
     92        vccio-supply = <&lt9211_1v8>;
     93
     94        ports {
     95          #address-cells = <1>;
     96          #size-cells = <0>;
     97
     98          port@0 {
     99            reg = <0>;
    100
    101            endpoint {
    102              remote-endpoint = <&dsi0_out>;
    103            };
    104          };
    105
    106          port@2 {
    107            reg = <2>;
    108
    109            endpoint {
    110              remote-endpoint = <&panel_in_lvds>;
    111            };
    112          };
    113        };
    114      };
    115    };
    116
    117...