tda998x.txt (1570B)
1Device-Tree bindings for the NXP TDA998x HDMI transmitter 2 3Required properties; 4 - compatible: must be "nxp,tda998x" 5 6 - reg: I2C address 7 8Required node: 9 - port: Input port node with endpoint definition, as described 10 in Documentation/devicetree/bindings/graph.txt 11 12Optional properties: 13 - interrupts: interrupt number and trigger type 14 default: polling 15 16 - pinctrl-0: pin control group to be used for 17 screen plug/unplug interrupt. 18 19 - pinctrl-names: must contain a "default" entry. 20 21 - video-ports: 24 bits value which defines how the video controller 22 output is wired to the TDA998x input - default: <0x230145> 23 24 - audio-ports: array of 8-bit values, 2 values per one DAI[1]. 25 The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2]. 26 The second value defines the tda998x AP_ENA reg content when the DAI 27 in question is used. The implementation allows one or two DAIs. If two 28 DAIs are defined, they must be of different type. 29 30 - nxp,calib-gpios: calibration GPIO, which must correspond with the 31 gpio used for the TDA998x interrupt pin. 32 33[1] Documentation/sound/soc/dai.rst 34[2] include/dt-bindings/display/tda998x.h 35 36Example: 37 38#include <dt-bindings/display/tda998x.h> 39 40 tda998x: hdmi-encoder { 41 compatible = "nxp,tda998x"; 42 reg = <0x70>; 43 interrupt-parent = <&gpio0>; 44 interrupts = <27 2>; /* falling edge */ 45 pinctrl-0 = <&pmx_camera>; 46 pinctrl-names = "default"; 47 video-ports = <0x230145>; 48 49 #sound-dai-cells = <2>; 50 /* DAI-format AP_ENA reg value */ 51 audio-ports = < TDA998x_SPDIF 0x04 52 TDA998x_I2S 0x03>; 53 54 };