cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

toshiba,tc358767.yaml (4393B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Toshiba TC358767 eDP bridge bindings
      8
      9maintainers:
     10  - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
     11
     12description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
     13
     14properties:
     15  compatible:
     16    const: toshiba,tc358767
     17
     18  reg:
     19    enum:
     20      - 0x68
     21      - 0x0f
     22    description: |
     23        i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
     24
     25  clock-names:
     26    const: "ref"
     27
     28  clocks:
     29    maxItems: 1
     30    description: |
     31        OF device-tree clock specification for refclk input. The reference.
     32        clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
     33
     34  shutdown-gpios:
     35    maxItems: 1
     36    description: |
     37        OF device-tree gpio specification for SD pin(active high shutdown input)
     38
     39  reset-gpios:
     40    maxItems: 1
     41    description: |
     42        OF device-tree gpio specification for RSTX pin(active low system reset)
     43
     44  toshiba,hpd-pin:
     45    $ref: /schemas/types.yaml#/definitions/uint32
     46    enum:
     47      - 0
     48      - 1
     49    description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
     50
     51  ports:
     52    $ref: /schemas/graph.yaml#/properties/ports
     53
     54    properties:
     55      port@0:
     56        $ref: /schemas/graph.yaml#/$defs/port-base
     57        unevaluatedProperties: false
     58        description: |
     59            DSI input port. The remote endpoint phandle should be a
     60            reference to a valid DSI output endpoint node
     61
     62        properties:
     63          endpoint:
     64            $ref: /schemas/media/video-interfaces.yaml#
     65            unevaluatedProperties: false
     66
     67            properties:
     68              data-lanes:
     69                description: array of physical DSI data lane indexes.
     70                minItems: 1
     71                items:
     72                  - const: 1
     73                  - const: 2
     74                  - const: 3
     75                  - const: 4
     76
     77      port@1:
     78        $ref: /schemas/graph.yaml#/properties/port
     79        description: |
     80            DPI input/output port. The remote endpoint phandle should be a
     81            reference to a valid DPI output or input endpoint node.
     82
     83      port@2:
     84        $ref: /schemas/graph.yaml#/properties/port
     85        description: |
     86            eDP/DP output port. The remote endpoint phandle should be a
     87            reference to a valid eDP panel input endpoint node. This port is
     88            optional, treated as DP panel if not defined
     89
     90    oneOf:
     91      - required:
     92          - port@0
     93      - required:
     94          - port@1
     95
     96
     97required:
     98  - compatible
     99  - reg
    100  - clock-names
    101  - clocks
    102  - ports
    103
    104additionalProperties: false
    105
    106examples:
    107  - |
    108    #include <dt-bindings/gpio/gpio.h>
    109
    110    /* DPI input and eDP output */
    111
    112    i2c {
    113        #address-cells = <1>;
    114        #size-cells = <0>;
    115
    116        edp-bridge@68 {
    117            compatible = "toshiba,tc358767";
    118            reg = <0x68>;
    119            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
    120            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
    121            clock-names = "ref";
    122            clocks = <&edp_refclk>;
    123
    124            ports {
    125                #address-cells = <1>;
    126                #size-cells = <0>;
    127
    128                port@1 {
    129                    reg = <1>;
    130
    131                    bridge_in_0: endpoint {
    132                        remote-endpoint = <&dpi_out>;
    133                    };
    134                };
    135
    136                port@2 {
    137                    reg = <2>;
    138
    139                    bridge_out: endpoint {
    140                        remote-endpoint = <&panel_in>;
    141                    };
    142                };
    143            };
    144        };
    145    };
    146  - |
    147    /* DPI input and DP output */
    148
    149    i2c {
    150        #address-cells = <1>;
    151        #size-cells = <0>;
    152
    153        edp-bridge@68 {
    154            compatible = "toshiba,tc358767";
    155            reg = <0x68>;
    156            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
    157            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
    158            clock-names = "ref";
    159            clocks = <&edp_refclk>;
    160
    161            ports {
    162                #address-cells = <1>;
    163                #size-cells = <0>;
    164
    165                port@1 {
    166                    reg = <1>;
    167
    168                    bridge_in_1: endpoint {
    169                        remote-endpoint = <&dpi_out>;
    170                    };
    171                };
    172            };
    173        };
    174    };