exynos_dsim.txt (2745B)
1Exynos MIPI DSI Master 2 3Required properties: 4 - compatible: value should be one of the following 5 "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ 6 "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ 7 "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ 8 "samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */ 9 "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ 10 - reg: physical base address and length of the registers set for the device 11 - interrupts: should contain DSI interrupt 12 - clocks: list of clock specifiers, must contain an entry for each required 13 entry in clock-names 14 - clock-names: should include "bus_clk"and "sclk_mipi" entries 15 the use of "pll_clk" is deprecated 16 - phys: list of phy specifiers, must contain an entry for each required 17 entry in phy-names 18 - phy-names: should include "dsim" entry 19 - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) 20 - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) 21 - samsung,pll-clock-frequency: specifies frequency of the oscillator clock 22 - #address-cells, #size-cells: should be set respectively to <1> and <0> 23 according to DSI host bindings (see MIPI DSI bindings [1]) 24 - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst 25 mode 26 - samsung,esc-clock-frequency: specifies DSI frequency in escape mode 27 28Optional properties: 29 - power-domains: a phandle to DSIM power domain node 30 31Child nodes: 32 Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). 33 34Video interfaces: 35 Device node can contain following video interface port nodes according to [2]: 36 0: RGB input, 37 1: DSI output 38 39[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt 40[2]: Documentation/devicetree/bindings/media/video-interfaces.txt 41 42Example: 43 44 dsi@11c80000 { 45 compatible = "samsung,exynos4210-mipi-dsi"; 46 reg = <0x11C80000 0x10000>; 47 interrupts = <0 79 0>; 48 clocks = <&clock 286>, <&clock 143>; 49 clock-names = "bus_clk", "sclk_mipi"; 50 phys = <&mipi_phy 1>; 51 phy-names = "dsim"; 52 vddcore-supply = <&vusb_reg>; 53 vddio-supply = <&vmipi_reg>; 54 power-domains = <&pd_lcd0>; 55 #address-cells = <1>; 56 #size-cells = <0>; 57 samsung,pll-clock-frequency = <24000000>; 58 59 panel@1 { 60 reg = <0>; 61 ... 62 port { 63 panel_ep: endpoint { 64 remote-endpoint = <&dsi_ep>; 65 }; 66 }; 67 }; 68 69 ports { 70 #address-cells = <1>; 71 #size-cells = <0>; 72 73 port@0 { 74 reg = <0>; 75 decon_to_mic: endpoint { 76 remote-endpoint = <&mic_to_decon>; 77 }; 78 }; 79 80 port@1 { 81 reg = <1>; 82 dsi_ep: endpoint { 83 reg = <0>; 84 samsung,burst-clock-frequency = <500000000>; 85 samsung,esc-clock-frequency = <20000000>; 86 remote-endpoint = <&panel_ep>; 87 }; 88 }; 89 }; 90 };