marvell,pxa2xx-lcdc.txt (980B)
1PXA LCD Controller 2------------------ 3 4Required properties: 5 - compatible : one of these 6 "marvell,pxa2xx-lcdc", 7 "marvell,pxa270-lcdc", 8 "marvell,pxa300-lcdc" 9 - reg : should contain 1 register range (address and length). 10 - interrupts : framebuffer controller interrupt. 11 - clocks: phandle to input clocks 12 13Optional properties: 14 - lcd-supply: A phandle to a power regulator that controls the LCD voltage. 15 16Required nodes: 17 - port: connection to the LCD panel (see video-interfaces.txt) 18 This node must have its properties bus-width and remote-endpoint set. 19 If the panel is not a TFT color panel, then a "lcd-type" property in 20 the panel should specify the panel type. 21 This panel node should be in the board dts. 22 23Example: 24 lcd-controller@40500000 { 25 compatible = "marvell,pxa2xx-lcdc"; 26 reg = <0x44000000 0x10000>; 27 interrupts = <17>; 28 clocks = <&clks CLK_LCD>; 29 30 port { 31 lcdc_out: endpoint { 32 remote-endpoint = <&panel_in>; 33 bus-width = <16>; 34 }; 35 }; 36 };