cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

olimex,lcd-olinuxino.yaml (1734B)

      1# SPDX-License-Identifier: GPL-2.0
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
      8
      9maintainers:
     10  - Stefan Mavrodiev <stefan@olimex.com>
     11
     12description: |
     13  This device can be used as bridge between a host controller and LCD panels.
     14  Currently supported LCDs are:
     15    - LCD-OLinuXino-4.3TS
     16    - LCD-OLinuXino-5
     17    - LCD-OLinuXino-7
     18    - LCD-OLinuXino-10
     19
     20  The panel itself contains:
     21    - AT24C16C EEPROM holding panel identification and timing requirements
     22    - AR1021 resistive touch screen controller (optional)
     23    - FT5x6 capacitive touch screnn controller (optional)
     24    - GT911/GT928 capacitive touch screen controller (optional)
     25
     26  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
     27  device information (id, serial, etc.) and timing requirements.
     28
     29  Touchscreen bingings can be found in these files:
     30    - input/touchscreen/goodix.yaml
     31    - input/touchscreen/edt-ft5x06.txt
     32    - input/touchscreen/ar1021.txt
     33
     34allOf:
     35  - $ref: panel-common.yaml#
     36
     37properties:
     38  compatible:
     39    const: olimex,lcd-olinuxino
     40
     41  backlight: true
     42  enable-gpios: true
     43  power-supply: true
     44  reg: true
     45
     46required:
     47  - compatible
     48  - reg
     49  - power-supply
     50
     51additionalProperties: false
     52
     53examples:
     54  - |
     55    #include <dt-bindings/gpio/gpio.h>
     56
     57    i2c {
     58        #address-cells = <1>;
     59        #size-cells = <0>;
     60
     61        panel@50 {
     62            compatible = "olimex,lcd-olinuxino";
     63            reg = <0x50>;
     64            power-supply = <&reg_vcc5v0>;
     65            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
     66            backlight = <&backlight>;
     67        };
     68    };
     69
     70...