sitronix,st7586.txt (693B)
1Sitronix ST7586 display panel 2 3Required properties: 4- compatible: "lego,ev3-lcd". 5- a0-gpios: The A0 signal (since this binding is for serial mode, this is 6 the pin labeled D1 on the controller, not the pin labeled A0) 7- reset-gpios: Reset pin 8 9The node for this driver must be a child node of a SPI controller, hence 10all mandatory properties described in ../spi/spi-bus.txt must be specified. 11 12Optional properties: 13- rotation: panel rotation in degrees counter clockwise (0,90,180,270) 14 15Example: 16 display@0{ 17 compatible = "lego,ev3-lcd"; 18 reg = <0>; 19 spi-max-frequency = <10000000>; 20 a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; 21 reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; 22 };