lattice-ice40-fpga-mgr.txt (729B)
1Lattice iCE40 FPGA Manager 2 3Required properties: 4- compatible: Should contain "lattice,ice40-fpga-mgr" 5- reg: SPI chip select 6- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000) 7- cdone-gpios: GPIO input connected to CDONE pin 8- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note 9 that unless the GPIO is held low during startup, the 10 FPGA will enter Master SPI mode and drive SCK with a 11 clock signal potentially jamming other devices on the 12 bus until the firmware is loaded. 13 14Example: 15 fpga: fpga@0 { 16 compatible = "lattice,ice40-fpga-mgr"; 17 reg = <0>; 18 spi-max-frequency = <1000000>; 19 cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; 20 reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; 21 };