nvidia,tegra186-gpio.yaml (7981B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/gpio/nvidia,tegra186-gpio.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: NVIDIA Tegra GPIO Controller (Tegra186 and later) 8 9maintainers: 10 - Thierry Reding <thierry.reding@gmail.com> 11 - Jon Hunter <jonathanh@nvidia.com> 12 13description: | 14 Tegra186 contains two GPIO controllers; a main controller and an "AON" 15 controller. This binding document applies to both controllers. The register 16 layouts for the controllers share many similarities, but also some 17 significant differences. Hence, this document describes closely related but 18 different bindings and compatible values. 19 20 The Tegra186 GPIO controller allows software to set the IO direction of, 21 and read/write the value of, numerous GPIO signals. Routing of GPIO signals 22 to package balls is under the control of a separate pin controller hardware 23 block. Two major sets of registers exist: 24 25 a) Security registers, which allow configuration of allowed access to the 26 GPIO register set. These registers exist in a single contiguous block 27 of physical address space. The size of this block, and the security 28 features available, varies between the different GPIO controllers. 29 30 Access to this set of registers is not necessary in all circumstances. 31 Code that wishes to configure access to the GPIO registers needs access 32 to these registers to do so. Code which simply wishes to read or write 33 GPIO data does not need access to these registers. 34 35 b) GPIO registers, which allow manipulation of the GPIO signals. In some 36 GPIO controllers, these registers are exposed via multiple "physical 37 aliases" in address space, each of which access the same underlying 38 state. See the hardware documentation for rationale. Any particular 39 GPIO client is expected to access just one of these physical aliases. 40 41 Tegra HW documentation describes a unified naming convention for all GPIOs 42 implemented by the SoC. Each GPIO is assigned to a port, and a port may 43 control a number of GPIOs. Thus, each GPIO is named according to an 44 alphabetical port name and an integer GPIO name within the port. For 45 example, GPIO_PA0, GPIO_PN6, or GPIO_PCC3. 46 47 The number of ports implemented by each GPIO controller varies. The number 48 of implemented GPIOs within each port varies. GPIO registers within a 49 controller are grouped and laid out according to the port they affect. 50 51 The mapping from port name to the GPIO controller that implements that 52 port, and the mapping from port name to register offset within a 53 controller, are both extremely non-linear. The header file 54 <dt-bindings/gpio/tegra186-gpio.h> describes the port-level mapping. In 55 that file, the naming convention for ports matches the HW documentation. 56 The values chosen for the names are alphabetically sorted within a 57 particular controller. Drivers need to map between the DT GPIO IDs and HW 58 register offsets using a lookup table. 59 60 Each GPIO controller can generate a number of interrupt signals. Each 61 signal represents the aggregate status for all GPIOs within a set of 62 ports. Thus, the number of interrupt signals generated by a controller 63 varies as a rough function of the number of ports it implements. Note 64 that the HW documentation refers to both the overall controller HW 65 module and the sets-of-ports as "controllers". 66 67 Each GPIO controller in fact generates multiple interrupts signals for 68 each set of ports. Each GPIO may be configured to feed into a specific 69 one of the interrupt signals generated by a set-of-ports. The intent is 70 for each generated signal to be routed to a different CPU, thus allowing 71 different CPUs to each handle subsets of the interrupts within a port. 72 The status of each of these per-port-set signals is reported via a 73 separate register. Thus, a driver needs to know which status register to 74 observe. This binding currently defines no configuration mechanism for 75 this. By default, drivers should use register 76 GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could 77 define a property to configure this. 78 79properties: 80 compatible: 81 enum: 82 - nvidia,tegra186-gpio 83 - nvidia,tegra186-gpio-aon 84 - nvidia,tegra194-gpio 85 - nvidia,tegra194-gpio-aon 86 - nvidia,tegra234-gpio 87 - nvidia,tegra234-gpio-aon 88 89 reg-names: 90 items: 91 - const: security 92 - const: gpio 93 minItems: 1 94 95 reg: 96 items: 97 - description: Security configuration registers. 98 - description: | 99 GPIO control registers. This may cover either: 100 101 a) The single physical alias that this OS should use. 102 b) All physical aliases that exist in the controller. This is 103 appropriate when the OS is responsible for managing assignment 104 of the physical aliases. 105 minItems: 1 106 107 interrupts: 108 description: The interrupt outputs from the HW block, one per set of 109 ports, in the order the HW manual describes them. The number of entries 110 required varies depending on compatible value. 111 112 gpio-controller: true 113 114 "#gpio-cells": 115 description: | 116 Indicates how many cells are used in a consumer's GPIO specifier. In the 117 specifier: 118 119 - The first cell is the pin number. 120 See <dt-bindings/gpio/tegra186-gpio.h>. 121 - The second cell contains flags: 122 - Bit 0 specifies polarity 123 - 0: Active-high (normal). 124 - 1: Active-low (inverted). 125 const: 2 126 127 interrupt-controller: true 128 129 "#interrupt-cells": 130 description: | 131 Indicates how many cells are used in a consumer's interrupt specifier. 132 In the specifier: 133 134 - The first cell is the GPIO number. 135 See <dt-bindings/gpio/tegra186-gpio.h>. 136 - The second cell is contains flags: 137 - Bits [3:0] indicate trigger type and level: 138 - 1: Low-to-high edge triggered. 139 - 2: High-to-low edge triggered. 140 - 4: Active high level-sensitive. 141 - 8: Active low level-sensitive. 142 143 Valid combinations are 1, 2, 3, 4, 8. 144 const: 2 145 146allOf: 147 - if: 148 properties: 149 compatible: 150 contains: 151 enum: 152 - nvidia,tegra186-gpio 153 - nvidia,tegra194-gpio 154 - nvidia,tegra234-gpio 155 then: 156 properties: 157 interrupts: 158 minItems: 6 159 maxItems: 48 160 161 - if: 162 properties: 163 compatible: 164 contains: 165 enum: 166 - nvidia,tegra186-gpio-aon 167 - nvidia,tegra194-gpio-aon 168 - nvidia,tegra234-gpio-aon 169 then: 170 properties: 171 interrupts: 172 minItems: 1 173 maxItems: 4 174 175required: 176 - compatible 177 - reg 178 - reg-names 179 - interrupts 180 181additionalProperties: false 182 183examples: 184 - | 185 #include <dt-bindings/interrupt-controller/irq.h> 186 187 gpio@2200000 { 188 compatible = "nvidia,tegra186-gpio"; 189 reg-names = "security", "gpio"; 190 reg = <0x2200000 0x10000>, 191 <0x2210000 0x10000>; 192 interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>, 193 <0 50 IRQ_TYPE_LEVEL_HIGH>, 194 <0 53 IRQ_TYPE_LEVEL_HIGH>, 195 <0 56 IRQ_TYPE_LEVEL_HIGH>, 196 <0 59 IRQ_TYPE_LEVEL_HIGH>, 197 <0 180 IRQ_TYPE_LEVEL_HIGH>; 198 gpio-controller; 199 #gpio-cells = <2>; 200 interrupt-controller; 201 #interrupt-cells = <2>; 202 }; 203 204 gpio@c2f0000 { 205 compatible = "nvidia,tegra186-gpio-aon"; 206 reg-names = "security", "gpio"; 207 reg = <0xc2f0000 0x1000>, 208 <0xc2f1000 0x1000>; 209 interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; 210 gpio-controller; 211 #gpio-cells = <2>; 212 interrupt-controller; 213 #interrupt-cells = <2>; 214 };