sodaville.txt (1497B)
1GPIO controller on CE4100 / Sodaville SoCs 2========================================== 3 4The bindings for CE4100's GPIO controller match the generic description 5which is covered by the gpio.txt file in this folder. 6 7The only additional property is the intel,muxctl property which holds the 8value which is written into the MUXCNTL register. 9 10There is no compatible property for now because the driver is probed via 11PCI id (vendor 0x8086 device 0x2e67). 12 13The interrupt specifier consists of two cells encoded as follows: 14 - <1st cell>: The interrupt-number that identifies the interrupt source. 15 - <2nd cell>: The level-sense information, encoded as follows: 16 4 - active high level-sensitive 17 8 - active low level-sensitive 18 19Example of the GPIO device and one user: 20 21 pcigpio: gpio@b,1 { 22 /* two cells for GPIO and interrupt */ 23 #gpio-cells = <2>; 24 #interrupt-cells = <2>; 25 compatible = "pci8086,2e67.2", 26 "pci8086,2e67", 27 "pciclassff0000", 28 "pciclassff00"; 29 30 reg = <0x15900 0x0 0x0 0x0 0x0>; 31 /* Interrupt line of the gpio device */ 32 interrupts = <15 1>; 33 /* It is an interrupt and GPIO controller itself */ 34 interrupt-controller; 35 gpio-controller; 36 intel,muxctl = <0>; 37 }; 38 39 testuser@20 { 40 compatible = "example,testuser"; 41 /* User the 11th GPIO line as an active high triggered 42 * level interrupt 43 */ 44 interrupts = <11 8>; 45 interrupt-parent = <&pcigpio>; 46 /* Use this GPIO also with the gpio functions */ 47 gpios = <&pcigpio 11 0>; 48 };