cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ti,ina2xx.yaml (2058B)

      1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4
      5$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
      6$schema: http://devicetree.org/meta-schemas/core.yaml#
      7
      8title: Texas Instruments INA209 family of power/voltage monitors
      9
     10maintainers:
     11  - Krzysztof Kozlowski <krzk@kernel.org>
     12
     13description: |
     14  The INA209 is a high-side current shunt and power monitor with
     15  an I2C interface.
     16
     17  Datasheets:
     18    https://www.ti.com/product/INA209
     19
     20properties:
     21  compatible:
     22    enum:
     23      - ti,ina209
     24      - ti,ina219
     25      - ti,ina220
     26      - ti,ina226
     27      - ti,ina230
     28      - ti,ina231
     29      - ti,ina238
     30
     31  reg:
     32    maxItems: 1
     33
     34  shunt-resistor:
     35    description:
     36      Shunt resistor value in micro-Ohm.
     37    $ref: /schemas/types.yaml#/definitions/uint32
     38
     39  ti,shunt-gain:
     40    description: |
     41      Programmable gain divisor for the shunt voltage accuracy and range. This
     42      property only applies to devices that have configurable PGA/ADCRANGE. The
     43      gain value is used configure the gain and to convert the shunt voltage,
     44      current and power register values when reading measurements from the
     45      device.
     46
     47      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
     48      the gain value maps directly with the PG bits of the config register.
     49
     50      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
     51      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
     52      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
     53      voltage range is used.
     54
     55      The default value is device dependent, and is defined by the reset value
     56      of PGA/ADCRANGE in the respective configuration registers.
     57    $ref: /schemas/types.yaml#/definitions/uint32
     58    enum: [1, 2, 4, 8]
     59
     60required:
     61  - compatible
     62  - reg
     63
     64additionalProperties: false
     65
     66examples:
     67  - |
     68    i2c {
     69        #address-cells = <1>;
     70        #size-cells = <0>;
     71
     72        power-sensor@44 {
     73            compatible = "ti,ina220";
     74            reg = <0x44>;
     75            shunt-resistor = <1000>;
     76        };
     77    };