cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

bosch,bmi088.yaml (1481B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Bosch BMI088 IMU accelerometer part
      8
      9maintainers:
     10  - Mike Looijmans <mike.looijmans@topic.nl>
     11
     12description: |
     13  Acceleration part of the IMU sensor with an SPI interface
     14  Specifications about the sensor can be found at:
     15    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
     16
     17properties:
     18  compatible:
     19    enum:
     20      - bosch,bmi088-accel
     21
     22  reg:
     23    maxItems: 1
     24
     25  spi-max-frequency: true
     26
     27  vdd-supply: true
     28
     29  vddio-supply: true
     30
     31  interrupts:
     32    minItems: 1
     33    maxItems: 2
     34    description: |
     35      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
     36      Two configurable interrupt lines exist.
     37
     38  interrupt-names:
     39    description: Specify which interrupt line is in use.
     40    items:
     41      enum:
     42        - INT1
     43        - INT2
     44    minItems: 1
     45    maxItems: 2
     46
     47required:
     48  - compatible
     49  - reg
     50
     51additionalProperties: false
     52
     53examples:
     54  - |
     55    #include <dt-bindings/interrupt-controller/irq.h>
     56    spi {
     57      #address-cells = <1>;
     58      #size-cells = <0>;
     59      bmi088-accel@1 {
     60        compatible = "bosch,bmi088-accel";
     61        reg = <1>;
     62        spi-max-frequency = <10000000>;
     63        interrupt-parent = <&gpio6>;
     64        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
     65        interrupt-names = "INT2";
     66      };
     67    };
     68...