cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ti,ads131e08.yaml (4047B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
      8
      9maintainers:
     10  - Tomislav Denis <tomislav.denis@avl.com>
     11
     12description: |
     13  The ADS131E0x are a family of multichannel, simultaneous sampling,
     14  24-bit, delta-sigma, analog-to-digital converters (ADCs) with a
     15  built-in programmable gain amplifier (PGA), internal reference
     16  and an onboard oscillator.
     17  The communication with ADC chip is via the SPI bus (mode 1).
     18
     19  https://www.ti.com/lit/ds/symlink/ads131e08.pdf
     20
     21properties:
     22  compatible:
     23    enum:
     24      - ti,ads131e04
     25      - ti,ads131e06
     26      - ti,ads131e08
     27
     28  reg:
     29    maxItems: 1
     30
     31  spi-max-frequency: true
     32
     33  spi-cpha: true
     34
     35  clocks:
     36    description: |
     37      Device tree identifier to the clock source (2.048 MHz).
     38      Note: clock source is selected using CLKSEL pin.
     39    maxItems: 1
     40
     41  clock-names:
     42    items:
     43      - const: adc-clk
     44
     45  interrupts:
     46    description: |
     47      IRQ line for the ADC data ready.
     48    maxItems: 1
     49
     50  vref-supply:
     51    description: |
     52      Optional external voltage reference. If not supplied, internal voltage
     53      reference is used.
     54
     55  ti,vref-internal:
     56    description: |
     57      Select the internal voltage reference value.
     58      0: 2.4V
     59      1: 4.0V
     60      If this field is left empty, 2.4V is selected.
     61      Note: internal voltage reference is used only if vref-supply is not supplied.
     62    $ref: /schemas/types.yaml#/definitions/uint32
     63    enum: [0, 1]
     64    default: 0
     65
     66  '#address-cells':
     67    const: 1
     68
     69  '#size-cells':
     70    const: 0
     71
     72required:
     73  - compatible
     74  - reg
     75  - spi-cpha
     76  - clocks
     77  - clock-names
     78  - interrupts
     79
     80patternProperties:
     81  "^channel@([0-7])$":
     82    $ref: "adc.yaml"
     83    type: object
     84    description: |
     85      Represents the external channels which are connected to the ADC.
     86
     87    properties:
     88      reg:
     89        description: |
     90          The channel number.
     91          Up to 4 channels, numbered from 0 to 3 for ti,ads131e04.
     92          Up to 6 channels, numbered from 0 to 5 for ti,ads131e06.
     93          Up to 8 channels, numbered from 0 to 7 for ti,ads131e08.
     94        items:
     95          minimum: 0
     96          maximum: 7
     97
     98      ti,gain:
     99        description: |
    100          The PGA gain value for the channel.
    101          If this field is left empty, PGA gain 1 is used.
    102        $ref: /schemas/types.yaml#/definitions/uint32
    103        enum: [1, 2, 4, 8, 12]
    104        default: 1
    105
    106      ti,mux:
    107        description: |
    108          Channel input selection(muliplexer).
    109          0: Normal input.
    110          1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements).
    111          3: MVDD (for supply measurement)
    112          4: Temperature sensor
    113          If this field is left empty, normal input is selected.
    114        $ref: /schemas/types.yaml#/definitions/uint32
    115        enum: [0, 1, 3, 4]
    116        default: 0
    117
    118    required:
    119      - reg
    120
    121    additionalProperties: false
    122
    123additionalProperties: false
    124
    125examples:
    126  - |
    127    #include <dt-bindings/interrupt-controller/irq.h>
    128
    129    spi {
    130      #address-cells = <1>;
    131      #size-cells = <0>;
    132
    133      adc@0 {
    134        compatible = "ti,ads131e08";
    135        reg = <0>;
    136        spi-max-frequency = <1000000>;
    137        spi-cpha;
    138        clocks = <&clk2048k>;
    139        clock-names = "adc-clk";
    140        interrupt-parent = <&gpio5>;
    141        interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
    142        vref-supply = <&adc_vref>;
    143
    144        #address-cells = <1>;
    145        #size-cells = <0>;
    146
    147        channel@0 {
    148          reg = <0>;
    149        };
    150
    151        channel@1 {
    152          reg = <1>;
    153        };
    154
    155        channel@2 {
    156          reg = <2>;
    157          ti,gain = <2>;
    158        };
    159
    160        channel@3 {
    161          reg = <3>;
    162        };
    163
    164        channel@4 {
    165          reg = <4>;
    166        };
    167
    168        channel@5 {
    169          reg = <5>;
    170        };
    171
    172        channel@6 {
    173          reg = <6>;
    174        };
    175
    176        channel@7 {
    177          reg = <7>;
    178          ti,mux = <4>;
    179        };
    180      };
    181    };