cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

adi,ltc2688.yaml (3847B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Analog Devices LTC2688 DAC
      8
      9maintainers:
     10  - Nuno Sá <nuno.sa@analog.com>
     11
     12description: |
     13  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
     14  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
     15
     16properties:
     17  compatible:
     18    enum:
     19      - adi,ltc2688
     20
     21  reg:
     22    maxItems: 1
     23
     24  vcc-supply:
     25    description: Analog Supply Voltage Input.
     26
     27  iovcc-supply:
     28    description: Digital Input/Output Supply Voltage.
     29
     30  vref-supply:
     31    description:
     32      Reference Input/Output. The voltage at the REF pin sets the full-scale
     33      range of all channels. If not provided the internal reference is used and
     34      also provided on the VREF pin".
     35
     36  clr-gpios:
     37    description:
     38      If specified, it will be asserted during driver probe. As the line is
     39      active low, it should be marked GPIO_ACTIVE_LOW.
     40    maxItems: 1
     41
     42  '#address-cells':
     43    const: 1
     44
     45  '#size-cells':
     46    const: 0
     47
     48patternProperties:
     49  "^channel@([0-9]|1[0-5])$":
     50    type: object
     51
     52    properties:
     53      reg:
     54        description: The channel number representing the DAC output channel.
     55        maximum: 15
     56
     57      adi,toggle-mode:
     58        description:
     59          Set the channel as a toggle enabled channel. Toggle operation enables
     60          fast switching of a DAC output between two different DAC codes without
     61          any SPI transaction.
     62        type: boolean
     63
     64      adi,output-range-microvolt:
     65        description: Specify the channel output full scale range.
     66        oneOf:
     67          - items:
     68              - const: 0
     69              - enum: [5000000, 10000000]
     70          - items:
     71              - const: -5000000
     72              - const: 5000000
     73          - items:
     74              - const: -10000000
     75              - const: 10000000
     76          - items:
     77              - const: -15000000
     78              - const: 15000000
     79
     80      adi,overrange:
     81        description: Enable 5% overrange over the selected full scale range.
     82        type: boolean
     83
     84      clocks:
     85        maxItems: 1
     86
     87      adi,toggle-dither-input:
     88        description:
     89          Selects the TGPx pin to be associated with this channel. This setting
     90          only makes sense for toggle or dither enabled channels. If
     91          @adi,toggle-mode is not set and this property is given, the channel is
     92          assumed to be a dither capable channel. Note that multiple channels
     93          can be mapped to the same pin. If this setting is given, the
     94          respective @clock must also be provided. Mappings between this and
     95          input pins
     96            0 - TGP1
     97            1 - TGP2
     98            2 - TGP3
     99        $ref: /schemas/types.yaml#/definitions/uint32
    100        enum: [0, 1, 2]
    101
    102    dependencies:
    103      adi,toggle-dither-input: [ clocks ]
    104
    105    required:
    106      - reg
    107
    108required:
    109  - compatible
    110  - reg
    111
    112additionalProperties: false
    113
    114examples:
    115  - |
    116
    117    spi {
    118          #address-cells = <1>;
    119          #size-cells = <0>;
    120          ltc2688: ltc2688@0 {
    121                  compatible = "adi,ltc2688";
    122                  reg = <0>;
    123
    124                  vcc-supply = <&vcc>;
    125                  iovcc-supply = <&vcc>;
    126                  vref-supply = <&vref>;
    127
    128                  #address-cells = <1>;
    129                  #size-cells = <0>;
    130                  channel@0 {
    131                          reg = <0>;
    132                          adi,toggle-mode;
    133                          adi,overrange;
    134                  };
    135
    136                  channel@1 {
    137                          reg = <1>;
    138                          adi,output-range-microvolt = <0 10000000>;
    139
    140                          clocks = <&clock_tgp3>;
    141                          adi,toggle-dither-input = <2>;
    142                  };
    143          };
    144    };
    145
    146...