adi,admv1014.yaml (3114B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ADMV1014 Microwave Downconverter 8 9maintainers: 10 - Antoniu Miclaus <antoniu.miclaus@analog.com> 11 12description: | 13 Wideband, microwave downconverter optimized for point to point microwave 14 radio designs operating in the 24 GHz to 44 GHz frequency range. 15 16 https://www.analog.com/en/products/admv1014.html 17 18properties: 19 compatible: 20 enum: 21 - adi,admv1014 22 23 reg: 24 maxItems: 1 25 26 spi-max-frequency: 27 maximum: 1000000 28 29 clocks: 30 maxItems: 1 31 32 clock-names: 33 items: 34 - const: lo_in 35 description: 36 External clock that provides the Local Oscilator input. 37 38 vcm-supply: 39 description: 40 Common-mode voltage regulator. 41 42 vcc-if-bb-supply: 43 description: 44 BB and IF supply voltage regulator. 45 46 vcc-vga-supply: 47 description: 48 RF Amplifier supply voltage regulator. 49 50 vcc-vva-supply: 51 description: 52 VVA Control Circuit supply voltage regulator. 53 54 vcc-lna-3p3-supply: 55 description: 56 Low Noise Amplifier 3.3V supply voltage regulator. 57 58 vcc-lna-1p5-supply: 59 description: 60 Low Noise Amplifier 1.5V supply voltage regulator. 61 62 vcc-bg-supply: 63 description: 64 Band Gap Circuit supply voltage regulator. 65 66 vcc-quad-supply: 67 description: 68 Quadruple supply voltage regulator. 69 70 vcc-mixer-supply: 71 description: 72 Mixer supply voltage regulator. 73 74 adi,input-mode: 75 description: 76 Select the input mode. 77 iq - in-phase quadrature (I/Q) input 78 if - complex intermediate frequency (IF) input 79 enum: [iq, if] 80 81 adi,detector-enable: 82 description: 83 Digital Rx Detector Enable. The Square Law Detector output is 84 available at output pin VDET. 85 type: boolean 86 87 adi,p1db-compensation-enable: 88 description: 89 Turn on bits to optimize P1dB. 90 type: boolean 91 92 adi,quad-se-mode: 93 description: 94 Switch the LO path from differential to single-ended operation. 95 se-neg - Single-Ended Mode, Negative Side Disabled. 96 se-pos - Single-Ended Mode, Positive Side Disabled. 97 diff - Differential Mode. 98 enum: [se-neg, se-pos, diff] 99 100required: 101 - compatible 102 - reg 103 - clocks 104 - clock-names 105 - vcm-supply 106 107additionalProperties: false 108 109examples: 110 - | 111 spi { 112 #address-cells = <1>; 113 #size-cells = <0>; 114 converter@0 { 115 compatible = "adi,admv1014"; 116 reg = <0>; 117 spi-max-frequency = <1000000>; 118 clocks = <&admv1014_lo>; 119 clock-names = "lo_in"; 120 vcm-supply = <&vcm>; 121 vcc-if-bb-supply = <&vcc_if_bb>; 122 vcc-vga-supply = <&vcc_vga>; 123 vcc-vva-supply = <&vcc_vva>; 124 vcc-lna-3p3-supply = <&vcc_lna_3p3>; 125 vcc-lna-1p5-supply = <&vcc_lna_1p5>; 126 vcc-bg-supply = <&vcc_bg>; 127 vcc-quad-supply = <&vcc_quad>; 128 vcc-mixer-supply = <&vcc_mixer>; 129 adi,quad-se-mode = "diff"; 130 adi,detector-enable; 131 adi,p1db-compensation-enable; 132 }; 133 }; 134...