cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

capella,cm3605.yaml (2105B)

      1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/iio/light/capella,cm3605.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title:
      8  Capella Microsystems CM3605 Ambient Light and Short Distance Proximity Sensor
      9
     10maintainers:
     11  - Linus Walleij <linus.walleij@linaro.org>
     12  - Kevin Tsai <ktsai@capellamicro.com>
     13
     14description: |
     15  The CM3605 is an entirely analog part. However, it requires quite a bit of
     16  software logic to interface a host operating system.
     17
     18  This ALS and proximity sensor was one of the very first deployed in mobile
     19  handsets, notably it is used in the very first Nexus One Android phone from
     20  2010.
     21
     22properties:
     23  compatible:
     24    const: capella,cm3605
     25
     26  aset-gpios:
     27    maxItems: 1
     28    description:
     29      ASET line (drive low to activate the ALS, should be flagged
     30      GPIO_ACTIVE_LOW)
     31
     32  interrupts:
     33    maxItems: 1
     34    description:
     35      Connected to the POUT (proximity sensor out) line. The edge
     36      detection must be set to IRQ_TYPE_EDGE_BOTH so as to detect
     37      movements toward and away from the proximity sensor.
     38
     39  io-channels:
     40    maxItems: 1
     41    description:
     42      ADC channel used for converting the voltage from AOUT to a digital
     43      representation.
     44
     45  io-channel-names:
     46    const: aout
     47
     48  vdd-supply: true
     49
     50  capella,aset-resistance-ohms:
     51    enum: [50000, 100000, 300000, 600000]
     52    description: >
     53      Sensitivity calibration resistance. Note that calibration curves
     54      are only provided for specific allowed values. Default: 100 kOhms.
     55
     56required:
     57  - compatible
     58  - aset-gpios
     59  - interrupts
     60  - io-channels
     61  - io-channel-names
     62
     63additionalProperties: false
     64
     65examples:
     66  - |
     67    #include <dt-bindings/gpio/gpio.h>
     68    #include <dt-bindings/interrupt-controller/irq.h>
     69    light-sensor {
     70        compatible = "capella,cm3605";
     71        vdd-supply = <&foo_reg>;
     72        aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>;
     73        capella,aset-resistance-ohms = <100000>;
     74        interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
     75        io-channels = <&adc 0x01>;
     76        io-channel-names = "aout";
     77    };
     78...