cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

bmp085.yaml (1807B)

      1# SPDX-License-Identifier: GPL-2.0
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
      8
      9maintainers:
     10  - Andreas Klinger <ak@it-klinger.de>
     11
     12description: |
     13  Pressure, temperature and humidity iio sensors with i2c and spi interfaces
     14
     15  Specifications about the sensor can be found at:
     16    https://www.bosch-sensortec.com/bst/products/all_products/bmp180
     17    https://www.bosch-sensortec.com/bst/products/all_products/bmp280
     18    https://www.bosch-sensortec.com/bst/products/all_products/bme280
     19
     20properties:
     21  compatible:
     22    enum:
     23      - bosch,bmp085
     24      - bosch,bmp180
     25      - bosch,bmp280
     26      - bosch,bme280
     27
     28  reg:
     29    maxItems: 1
     30
     31  vddd-supply:
     32    description:
     33      digital voltage regulator (see regulator/regulator.txt)
     34
     35  vdda-supply:
     36    description:
     37      analog voltage regulator (see regulator/regulator.txt)
     38
     39  reset-gpios:
     40    description:
     41      A GPIO line handling reset of the sensor. As the line is active low,
     42      it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
     43    maxItems: 1
     44
     45  interrupts:
     46    description:
     47      interrupt mapping for IRQ (BMP085 only)
     48    maxItems: 1
     49
     50required:
     51  - compatible
     52  - vddd-supply
     53  - vdda-supply
     54
     55additionalProperties: false
     56
     57examples:
     58  - |
     59    #include <dt-bindings/gpio/gpio.h>
     60    #include <dt-bindings/interrupt-controller/irq.h>
     61    i2c0 {
     62      #address-cells = <1>;
     63      #size-cells = <0>;
     64      pressure@77 {
     65          compatible = "bosch,bmp085";
     66          reg = <0x77>;
     67          interrupt-parent = <&gpio0>;
     68          interrupts = <25 IRQ_TYPE_EDGE_RISING>;
     69          reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
     70          vddd-supply = <&foo>;
     71          vdda-supply = <&bar>;
     72      };
     73    };