bu21013.txt (1626B)
1* Rohm BU21013 Touch Screen 2 3Required properties: 4 - compatible : "rohm,bu21013_tp" 5 - reg : I2C device address 6 - reset-gpios : GPIO pin enabling (selecting) chip (CS) 7 - interrupt-parent : the phandle for the gpio controller 8 - interrupts : (gpio) interrupt to which the chip is connected 9 10Optional properties: 11 - touch-gpios : GPIO pin registering a touch event 12 - <supply_name>-supply : Phandle to a regulator supply 13 - touchscreen-size-x : General touchscreen binding, see [1]. 14 - touchscreen-size-y : General touchscreen binding, see [1]. 15 - touchscreen-inverted-x : General touchscreen binding, see [1]. 16 - touchscreen-inverted-y : General touchscreen binding, see [1]. 17 - touchscreen-swapped-x-y : General touchscreen binding, see [1]. 18 19[1] All general touchscreen properties are described in 20 Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt. 21 22Deprecated properties: 23 - rohm,touch-max-x : Maximum outward permitted limit in the X axis 24 - rohm,touch-max-y : Maximum outward permitted limit in the Y axis 25 - rohm,flip-x : Flip touch coordinates on the X axis 26 - rohm,flip-y : Flip touch coordinates on the Y axis 27 28Example: 29 30 i2c@80110000 { 31 bu21013_tp@5c { 32 compatible = "rohm,bu21013_tp"; 33 reg = <0x5c>; 34 interrupt-parent = <&gpio2>; 35 interrupts <&20 IRQ_TYPE_LEVEL_LOW>; 36 touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>; 37 avdd-supply = <&ab8500_ldo_aux1_reg>; 38 39 touchscreen-size-x = <384>; 40 touchscreen-size-y = <704>; 41 touchscreen-inverted-y; 42 }; 43 };