stmpe.txt (2609B)
1STMPE Touchscreen 2---------------- 3 4Required properties: 5 - compatible: "st,stmpe-ts" 6 7Optional properties: 8- st,ave-ctrl : Sample average control 9 0 -> 1 sample 10 1 -> 2 samples 11 2 -> 4 samples 12 3 -> 8 samples 13- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) 14 0 -> 10 us 15 1 -> 50 us 16 2 -> 100 us 17 3 -> 500 us 18 4 -> 1 ms 19 5 -> 5 ms 20 6 -> 10 ms 21 7 -> 50 ms 22- st,settling : Panel driver settling time (recommended is 2) 23 0 -> 10 us 24 1 -> 100 us 25 2 -> 500 us 26 3 -> 1 ms 27 4 -> 5 ms 28 5 -> 10 ms 29 6 -> 50 ms 30 7 -> 100 ms 31- st,fraction-z : Length of the fractional part in z (recommended is 7) 32 (fraction-z ([0..7]) = Count of the fractional part) 33- st,i-drive : current limit value of the touchscreen drivers 34 0 -> 20 mA (typical 35mA max) 35 1 -> 50 mA (typical 80 mA max) 36 37Optional properties common with MFD (deprecated): 38 - st,sample-time : ADC conversion time in number of clock. 39 0 -> 36 clocks 40 1 -> 44 clocks 41 2 -> 56 clocks 42 3 -> 64 clocks 43 4 -> 80 clocks (recommended) 44 5 -> 96 clocks 45 6 -> 124 clocks 46 - st,mod-12b : ADC Bit mode 47 0 -> 10bit ADC 48 1 -> 12bit ADC 49 - st,ref-sel : ADC reference source 50 0 -> internal 51 1 -> external 52 - st,adc-freq : ADC Clock speed 53 0 -> 1.625 MHz 54 1 -> 3.25 MHz 55 2 || 3 -> 6.5 MHz 56 57Node name must be stmpe_touchscreen and should be child node of stmpe node to 58which it belongs. 59 60Note that common ADC settings of stmpe_touchscreen (child) will take precedence 61over the settings done in MFD. 62 63Example: 64 65stmpe811@41 { 66 compatible = "st,stmpe811"; 67 pinctrl-names = "default"; 68 pinctrl-0 = <&pinctrl_touch_int>; 69 #address-cells = <1>; 70 #size-cells = <0>; 71 reg = <0x41>; 72 interrupts = <10 IRQ_TYPE_LEVEL_LOW>; 73 interrupt-parent = <&gpio4>; 74 interrupt-controller; 75 id = <0>; 76 blocks = <0x5>; 77 irq-trigger = <0x1>; 78 /* Common ADC settings */ 79 /* 3.25 MHz ADC clock speed */ 80 st,adc-freq = <1>; 81 /* 12-bit ADC */ 82 st,mod-12b = <1>; 83 /* internal ADC reference */ 84 st,ref-sel = <0>; 85 /* ADC converstion time: 80 clocks */ 86 st,sample-time = <4>; 87 88 stmpe_touchscreen { 89 compatible = "st,stmpe-ts"; 90 reg = <0>; 91 /* 8 sample average control */ 92 st,ave-ctrl = <3>; 93 /* 5 ms touch detect interrupt delay */ 94 st,touch-det-delay = <5>; 95 /* 1 ms panel driver settling time */ 96 st,settling = <3>; 97 /* 7 length fractional part in z */ 98 st,fraction-z = <7>; 99 /* 100 * 50 mA typical 80 mA max touchscreen drivers 101 * current limit value 102 */ 103 st,i-drive = <1>; 104 }; 105 stmpe_adc { 106 compatible = "st,stmpe-adc"; 107 st,norequest-mask = <0x0F>; 108 }; 109};