ti,tsc2005.yaml (3272B)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings 8 9maintainers: 10 - Marek Vasut <marex@denx.de> 11 - Michael Welling <mwelling@ieee.org> 12 13properties: 14 $nodename: 15 pattern: "^touchscreen(@.*)?$" 16 17 compatible: 18 enum: 19 - ti,tsc2004 20 - ti,tsc2005 21 22 reg: 23 maxItems: 1 24 description: | 25 I2C address when used on the I2C bus, or the SPI chip select index 26 when used on the SPI bus 27 28 interrupts: 29 maxItems: 1 30 31 reset-gpios: 32 maxItems: 1 33 description: GPIO specifier for the controller reset line 34 35 spi-max-frequency: 36 description: TSC2005 SPI bus clock frequency. 37 maximum: 25000000 38 39 ti,x-plate-ohms: 40 description: resistance of the touchscreen's X plates in ohm (defaults to 280) 41 42 ti,esd-recovery-timeout-ms: 43 description: | 44 if the touchscreen does not respond after the configured time 45 (in milli seconds), the driver will reset it. This is disabled 46 by default. 47 48 vio-supply: 49 description: Regulator specifier 50 51 touchscreen-fuzz-pressure: true 52 touchscreen-fuzz-x: true 53 touchscreen-fuzz-y: true 54 touchscreen-max-pressure: true 55 touchscreen-size-x: true 56 touchscreen-size-y: true 57 58allOf: 59 - $ref: touchscreen.yaml# 60 - if: 61 properties: 62 compatible: 63 contains: 64 const: ti,tsc2004 65 then: 66 properties: 67 spi-max-frequency: false 68 69additionalProperties: false 70 71required: 72 - compatible 73 - reg 74 - interrupts 75 76examples: 77 - | 78 #include <dt-bindings/interrupt-controller/irq.h> 79 #include <dt-bindings/gpio/gpio.h> 80 i2c { 81 #address-cells = <1>; 82 #size-cells = <0>; 83 touchscreen@48 { 84 compatible = "ti,tsc2004"; 85 reg = <0x48>; 86 vio-supply = <&vio>; 87 88 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; 89 interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; 90 91 touchscreen-fuzz-x = <4>; 92 touchscreen-fuzz-y = <7>; 93 touchscreen-fuzz-pressure = <2>; 94 touchscreen-size-x = <4096>; 95 touchscreen-size-y = <4096>; 96 touchscreen-max-pressure = <2048>; 97 98 ti,x-plate-ohms = <280>; 99 ti,esd-recovery-timeout-ms = <8000>; 100 }; 101 }; 102 - | 103 #include <dt-bindings/interrupt-controller/irq.h> 104 #include <dt-bindings/gpio/gpio.h> 105 spi { 106 #address-cells = <1>; 107 #size-cells = <0>; 108 touchscreen@0 { 109 compatible = "ti,tsc2005"; 110 spi-max-frequency = <6000000>; 111 reg = <0>; 112 113 vio-supply = <&vio>; 114 115 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ 116 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ 117 118 touchscreen-fuzz-x = <4>; 119 touchscreen-fuzz-y = <7>; 120 touchscreen-fuzz-pressure = <2>; 121 touchscreen-size-x = <4096>; 122 touchscreen-size-y = <4096>; 123 touchscreen-max-pressure = <2048>; 124 125 ti,x-plate-ohms = <280>; 126 ti,esd-recovery-timeout-ms = <8000>; 127 }; 128 };