marvell,sei.txt (1366B)
1Marvell SEI (System Error Interrupt) Controller 2----------------------------------------------- 3 4Marvell SEI (System Error Interrupt) controller is an interrupt 5aggregator. It receives interrupts from several sources and aggregates 6them to a single interrupt line (an SPI) on the parent interrupt 7controller. 8 9This interrupt controller can handle up to 64 SEIs, a set comes from the 10AP and is wired while a second set comes from the CPs by the mean of 11MSIs. 12 13Required properties: 14 15- compatible: should be one of: 16 * "marvell,ap806-sei" 17- reg: SEI registers location and length. 18- interrupts: identifies the parent IRQ that will be triggered. 19- #interrupt-cells: number of cells to define an SEI wired interrupt 20 coming from the AP, should be 1. The cell is the IRQ 21 number. 22- interrupt-controller: identifies the node as an interrupt controller 23 for AP interrupts. 24- msi-controller: identifies the node as an MSI controller for the CPs 25 interrupts. 26 27Example: 28 29 sei: interrupt-controller@3f0200 { 30 compatible = "marvell,ap806-sei"; 31 reg = <0x3f0200 0x40>; 32 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 33 #interrupt-cells = <1>; 34 interrupt-controller; 35 msi-controller; 36 };