open-pic.txt (3084B)
1* Open PIC Binding 2 3This binding specifies what properties must be available in the device tree 4representation of an Open PIC compliant interrupt controller. This binding is 5based on the binding defined for Open PIC in [1] and is a superset of that 6binding. 7 8Required properties: 9 10 NOTE: Many of these descriptions were paraphrased here from [1] to aid 11 readability. 12 13 - compatible: Specifies the compatibility list for the PIC. The type 14 shall be <string> and the value shall include "open-pic". 15 16 - reg: Specifies the base physical address(s) and size(s) of this 17 PIC's addressable register space. The type shall be <prop-encoded-array>. 18 19 - interrupt-controller: The presence of this property identifies the node 20 as an Open PIC. No property value shall be defined. 21 22 - #interrupt-cells: Specifies the number of cells needed to encode an 23 interrupt source. The type shall be a <u32> and the value shall be 2. 24 25 - #address-cells: Specifies the number of cells needed to encode an 26 address. The type shall be <u32> and the value shall be 0. As such, 27 'interrupt-map' nodes do not have to specify a parent unit address. 28 29Optional properties: 30 31 - pic-no-reset: The presence of this property indicates that the PIC 32 shall not be reset during runtime initialization. No property value shall 33 be defined. The presence of this property also mandates that any 34 initialization related to interrupt sources shall be limited to sources 35 explicitly referenced in the device tree. 36 37* Interrupt Specifier Definition 38 39 Interrupt specifiers consists of 2 cells encoded as 40 follows: 41 42 - <1st-cell>: The interrupt-number that identifies the interrupt source. 43 44 - <2nd-cell>: The level-sense information, encoded as follows: 45 0 = low-to-high edge triggered 46 1 = active low level-sensitive 47 2 = active high level-sensitive 48 3 = high-to-low edge triggered 49 50* Examples 51 52Example 1: 53 54 /* 55 * An Open PIC interrupt controller 56 */ 57 mpic: pic@40000 { 58 // This is an interrupt controller node. 59 interrupt-controller; 60 61 // No address cells so that 'interrupt-map' nodes which reference 62 // this Open PIC node do not need a parent address specifier. 63 #address-cells = <0>; 64 65 // Two cells to encode interrupt sources. 66 #interrupt-cells = <2>; 67 68 // Offset address of 0x40000 and size of 0x40000. 69 reg = <0x40000 0x40000>; 70 71 // Compatible with Open PIC. 72 compatible = "open-pic"; 73 74 // The PIC shall not be reset. 75 pic-no-reset; 76 }; 77 78Example 2: 79 80 /* 81 * An interrupt generating device that is wired to an Open PIC. 82 */ 83 serial0: serial@4500 { 84 // Interrupt source '42' that is active high level-sensitive. 85 // Note that there are only two cells as specified in the interrupt 86 // parent's '#interrupt-cells' property. 87 interrupts = <42 2>; 88 89 // The interrupt controller that this device is wired to. 90 interrupt-parent = <&mpic>; 91 }; 92 93* References 94 95[1] Devicetree Specification 96 (https://www.devicetree.org/specifications/) 97