cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

leds-is31fl319x.txt (1791B)

      1LEDs connected to is31fl319x LED controller chip
      2
      3Required properties:
      4- compatible : Should be any of
      5	"issi,is31fl3190"
      6	"issi,is31fl3191"
      7	"issi,is31fl3193"
      8	"issi,is31fl3196"
      9	"issi,is31fl3199"
     10	"si-en,sn3199".
     11- #address-cells: Must be 1.
     12- #size-cells: Must be 0.
     13- reg: 0x64, 0x65, 0x66, or 0x67.
     14
     15Optional properties:
     16- audio-gain-db : audio gain selection for external analog modulation input.
     17	Valid values: 0 - 21, step by 3 (rounded down)
     18	Default: 0
     19- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
     20
     21Each led is represented as a sub-node of the issi,is31fl319x device.
     22There can be less leds subnodes than the chip can support but not more.
     23
     24Required led sub-node properties:
     25- reg : number of LED line
     26	Valid values: 1 - number of leds supported by the chip variant.
     27
     28Optional led sub-node properties:
     29- label : see Documentation/devicetree/bindings/leds/common.txt.
     30- linux,default-trigger :
     31	see Documentation/devicetree/bindings/leds/common.txt.
     32- led-max-microamp : (optional)
     33	Valid values: 5000 - 40000, step by 5000 (rounded down)
     34	Default: 20000 (20 mA)
     35	Note: a driver will take the lowest of all led limits since the
     36	chip has a single global setting. The lowest value will be chosen
     37	due to the PWM specificity, where lower brightness is achieved
     38	by reducing the dury-cycle of pulses and not the current, which
     39	will always have its peak value equal to led-max-microamp.
     40
     41Examples:
     42
     43fancy_leds: leds@65 {
     44	compatible = "issi,is31fl3196";
     45	#address-cells = <1>;
     46	#size-cells = <0>;
     47	reg = <0x65>;
     48	shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
     49
     50	red_aux: led@1 {
     51		label = "red:aux";
     52		reg = <1>;
     53		led-max-microamp = <10000>;
     54	};
     55
     56	green_power: led@5 {
     57		label = "green:power";
     58		reg = <5>;
     59		linux,default-trigger = "default-on";
     60	};
     61};