cdns,csi2rx.txt (2614B)
1Cadence MIPI-CSI2 RX controller 2=============================== 3 4The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI 5lanes in input, and 4 different pixel streams in output. 6 7Required properties: 8 - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible 9 - reg: base address and size of the memory mapped region 10 - clocks: phandles to the clocks driving the controller 11 - clock-names: must contain: 12 * sys_clk: main clock 13 * p_clk: register bank clock 14 * pixel_if[0-3]_clk: pixel stream output clock, one for each stream 15 implemented in hardware, between 0 and 3 16 17Optional properties: 18 - phys: phandle to the external D-PHY, phy-names must be provided 19 - phy-names: must contain "dphy", if the implementation uses an 20 external D-PHY 21 22Required subnodes: 23 - ports: A ports node with one port child node per device input and output 24 port, in accordance with the video interface bindings defined in 25 Documentation/devicetree/bindings/media/video-interfaces.txt. The 26 port nodes are numbered as follows: 27 28 Port Description 29 ----------------------------- 30 0 CSI-2 input 31 1 Stream 0 output 32 2 Stream 1 output 33 3 Stream 2 output 34 4 Stream 3 output 35 36 The stream output port nodes are optional if they are not 37 connected to anything at the hardware level or implemented 38 in the design.Since there is only one endpoint per port, 39 the endpoints are not numbered. 40 41 42Example: 43 44csi2rx: csi-bridge@0d060000 { 45 compatible = "cdns,csi2rx"; 46 reg = <0x0d060000 0x1000>; 47 clocks = <&byteclock>, <&byteclock> 48 <&coreclock>, <&coreclock>, 49 <&coreclock>, <&coreclock>; 50 clock-names = "sys_clk", "p_clk", 51 "pixel_if0_clk", "pixel_if1_clk", 52 "pixel_if2_clk", "pixel_if3_clk"; 53 54 ports { 55 #address-cells = <1>; 56 #size-cells = <0>; 57 58 port@0 { 59 reg = <0>; 60 61 csi2rx_in_sensor: endpoint { 62 remote-endpoint = <&sensor_out_csi2rx>; 63 clock-lanes = <0>; 64 data-lanes = <1 2>; 65 }; 66 }; 67 68 port@1 { 69 reg = <1>; 70 71 csi2rx_out_grabber0: endpoint { 72 remote-endpoint = <&grabber0_in_csi2rx>; 73 }; 74 }; 75 76 port@2 { 77 reg = <2>; 78 79 csi2rx_out_grabber1: endpoint { 80 remote-endpoint = <&grabber1_in_csi2rx>; 81 }; 82 }; 83 84 port@3 { 85 reg = <3>; 86 87 csi2rx_out_grabber2: endpoint { 88 remote-endpoint = <&grabber2_in_csi2rx>; 89 }; 90 }; 91 92 port@4 { 93 reg = <4>; 94 95 csi2rx_out_grabber3: endpoint { 96 remote-endpoint = <&grabber3_in_csi2rx>; 97 }; 98 }; 99 }; 100};