cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

aptina,mt9v111.yaml (1603B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Aptina MT9V111 CMOS sensor
      8
      9maintainers:
     10  - Jacopo Mondi <jacopo@jmondi.org>
     11
     12description: |
     13  The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
     14  based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
     15
     16  The sensor has an active pixel array of 640x480 pixels and can output a number
     17  of image resolutions and formats controllable through a simple two-wires
     18  interface.
     19
     20properties:
     21  compatible:
     22    const: aptina,mt9v111
     23
     24  reg:
     25    maxItems: 1
     26
     27  clocks:
     28    maxItems: 1
     29
     30  enable-gpios:
     31    description: Enable signal, pin name "OE#". Active low.
     32    maxItems: 1
     33
     34  standby-gpios:
     35    description: |
     36      Low power state control signal, pin name "STANDBY". Active high.
     37    maxItems: 1
     38
     39  reset-gpios:
     40    description: Chip reset signal, pin name "RESET#". Active low.
     41    maxItems: 1
     42
     43  port:
     44    $ref: /schemas/graph.yaml#/properties/port
     45    description: |
     46      Output video port.
     47
     48required:
     49  - compatible
     50  - reg
     51  - clocks
     52  - port
     53
     54additionalProperties: false
     55
     56examples:
     57  - |
     58    i2c0 {
     59        #address-cells = <1>;
     60        #size-cells = <0>;
     61
     62        camera@48 {
     63            compatible = "aptina,mt9v111";
     64            reg = <0x48>;
     65            clocks = <&camera_clk>;
     66
     67            port {
     68                mt9v111_out: endpoint {
     69                    remote-endpoint = <&ceu_in>;
     70                };
     71            };
     72        };
     73    };
     74
     75...