cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

chrontel,ch7322.yaml (1561B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
      5$schema: "http://devicetree.org/meta-schemas/core.yaml#"
      6
      7title: Chrontel HDMI-CEC Controller
      8
      9maintainers:
     10  - Jeff Chase <jnchase@google.com>
     11
     12description:
     13  The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
     14  programmable through I2C and drives a single CEC line.
     15
     16properties:
     17  compatible:
     18    const: chrontel,ch7322
     19
     20  reg:
     21    description: I2C device address
     22    maxItems: 1
     23
     24  clocks:
     25    maxItems: 1
     26
     27  interrupts:
     28    maxItems: 1
     29
     30  reset-gpios:
     31    description:
     32      Reference to the GPIO connected to the RESET pin, if any. This
     33      pin is active-low.
     34    maxItems: 1
     35
     36  standby-gpios:
     37    description:
     38      Reference to the GPIO connected to the OE pin, if any. When low
     39      the device will respond to power status requests with "standby"
     40      if in auto mode.
     41    maxItems: 1
     42
     43  # see ../cec.txt
     44  hdmi-phandle:
     45    description: phandle to the HDMI controller
     46
     47required:
     48  - compatible
     49  - reg
     50  - interrupts
     51
     52additionalProperties: false
     53
     54examples:
     55  - |
     56    #include <dt-bindings/gpio/gpio.h>
     57    #include <dt-bindings/interrupt-controller/irq.h>
     58    i2c {
     59      #address-cells = <1>;
     60      #size-cells = <0>;
     61      ch7322@75 {
     62        compatible = "chrontel,ch7322";
     63        reg = <0x75>;
     64        interrupts = <47 IRQ_TYPE_EDGE_RISING>;
     65        standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
     66        reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
     67        hdmi-phandle = <&hdmi>;
     68      };
     69    };