mt9m001.txt (1048B)
1MT9M001: 1/2-Inch Megapixel Digital Image Sensor 2 3The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital 4image sensor. It is programmable through I2C interface. 5 6Required Properties: 7 8- compatible: shall be "onnn,mt9m001". 9- clocks: reference to the master clock into sensor 10 11Optional Properties: 12 13- reset-gpios: GPIO handle which is connected to the reset pin of the chip. 14 Active low. 15- standby-gpios: GPIO handle which is connected to the standby pin of the chip. 16 Active high. 17 18The device node must contain one 'port' child node with one 'endpoint' child 19sub-node for its digital output video port, in accordance with the video 20interface bindings defined in: 21Documentation/devicetree/bindings/media/video-interfaces.txt 22 23Example: 24 25 &i2c1 { 26 camera-sensor@5d { 27 compatible = "onnn,mt9m001"; 28 reg = <0x5d>; 29 reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; 30 standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; 31 clocks = <&camera_clk>; 32 port { 33 mt9m001_out: endpoint { 34 remote-endpoint = <&vcap_in>; 35 }; 36 }; 37 }; 38 };