cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ov5645.txt (1593B)

      1* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
      2
      3The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
      4an active array size of 2592H x 1944V. It is programmable through a serial I2C
      5interface.
      6
      7Required Properties:
      8- compatible: Value should be "ovti,ov5645".
      9- clocks: Reference to the xclk clock.
     10- clock-names: Should be "xclk".
     11- clock-frequency: Frequency of the xclk clock.
     12- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
     13  to the hardware pin PWDNB which is physically active low.
     14- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
     15  the hardware pin RESETB.
     16- vdddo-supply: Chip digital IO regulator.
     17- vdda-supply: Chip analog regulator.
     18- vddd-supply: Chip digital core regulator.
     19
     20The device node must contain one 'port' child node for its digital output
     21video port, in accordance with the video interface bindings defined in
     22Documentation/devicetree/bindings/media/video-interfaces.txt.
     23
     24Example:
     25
     26	&i2c1 {
     27		...
     28
     29		ov5645: ov5645@3c {
     30			compatible = "ovti,ov5645";
     31			reg = <0x3c>;
     32
     33			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
     34			reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
     35			pinctrl-names = "default";
     36			pinctrl-0 = <&camera_rear_default>;
     37
     38			clocks = <&clks 200>;
     39			clock-names = "xclk";
     40			clock-frequency = <24000000>;
     41
     42			vdddo-supply = <&camera_dovdd_1v8>;
     43			vdda-supply = <&camera_avdd_2v8>;
     44			vddd-supply = <&camera_dvdd_1v2>;
     45
     46			port {
     47				ov5645_ep: endpoint {
     48					clock-lanes = <1>;
     49					data-lanes = <0 2>;
     50					remote-endpoint = <&csi0_ep>;
     51				};
     52			};
     53		};
     54	};