cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ov7670.txt (1694B)

      1* Omnivision OV7670 CMOS sensor
      2
      3The Omnivision OV7670 sensor supports multiple resolutions output, such as
      4CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
      5output formats.
      6
      7Required Properties:
      8- compatible: should be "ovti,ov7670"
      9- clocks: reference to the xclk input clock.
     10- clock-names: should be "xclk".
     11
     12Required Endpoint Properties:
     13- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
     14- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
     15
     16Optional Properties:
     17- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
     18  Active is low.
     19- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
     20  Active is high.
     21- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
     22  signal during horizontal blankings.
     23
     24The device node must contain one 'port' child node with one 'endpoint' child
     25sub-node for its digital output video port, in accordance with the video
     26interface bindings defined in:
     27Documentation/devicetree/bindings/media/video-interfaces.txt.
     28
     29Example:
     30
     31	i2c1: i2c@f0018000 {
     32		ov7670: camera@21 {
     33			compatible = "ovti,ov7670";
     34			reg = <0x21>;
     35			pinctrl-names = "default";
     36			pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
     37			reset-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
     38			powerdown-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
     39			clocks = <&pck0>;
     40			clock-names = "xclk";
     41			assigned-clocks = <&pck0>;
     42			assigned-clock-rates = <25000000>;
     43
     44			ov7670,pclk-hb-disable;
     45
     46			port {
     47				ov7670_0: endpoint {
     48					hsync-active = <0>;
     49					vsync-active = <0>;
     50
     51					remote-endpoint = <&isi_0>;
     52				};
     53			};
     54		};
     55	};