cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ovti,ov2680.yaml (2363B)

      1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
      2%YAML 1.2
      3---
      4$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml#
      5$schema: http://devicetree.org/meta-schemas/core.yaml#
      6
      7title: Omnivision OV2680 CMOS Sensor
      8
      9maintainers:
     10  - Rui Miguel Silva <rmfrfs@gmail.com>
     11
     12description: |-
     13  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
     14  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
     15  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
     16  various formats via the control of the Serial Camera Control Bus (SCCB)
     17  interface. The OV2680 has an image array capable of operating at up to 30
     18  frames per second (fps) in UXGA resolution.
     19
     20properties:
     21  compatible:
     22    const: ovti,ov2680
     23
     24  reg:
     25    maxItems: 1
     26
     27  clocks:
     28    maxItems: 1
     29
     30  clock-names:
     31    const: xvclk
     32
     33  reset-gpios:
     34    description:
     35      The phandle and specifier for the GPIO that controls sensor reset.
     36      This corresponds to the hardware pin XSHUTDOWN which is physically
     37      active low.
     38    maxItems: 1
     39
     40  dovdd-supply:
     41    description:
     42      Definition of the regulator used as interface power supply.
     43
     44  avdd-supply:
     45    description:
     46      Definition of the regulator used as analog power supply.
     47
     48  dvdd-supply:
     49    description:
     50      Definition of the regulator used as digital power supply.
     51
     52  port:
     53    $ref: /schemas/graph.yaml#/properties/port
     54    description:
     55      A node containing an output port node.
     56
     57required:
     58  - compatible
     59  - reg
     60  - clocks
     61  - clock-names
     62  - dovdd-supply
     63  - avdd-supply
     64  - dvdd-supply
     65  - reset-gpios
     66  - port
     67
     68additionalProperties: false
     69
     70examples:
     71  - |
     72    #include <dt-bindings/gpio/gpio.h>
     73
     74    i2c {
     75        #address-cells = <1>;
     76        #size-cells = <0>;
     77
     78        ov2680: camera-sensor@36 {
     79                compatible = "ovti,ov2680";
     80                reg = <0x36>;
     81                clocks = <&osc>;
     82                clock-names = "xvclk";
     83                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
     84
     85                dovdd-supply = <&sw2_reg>;
     86                dvdd-supply = <&sw2_reg>;
     87                avdd-supply = <&reg_peri_3p15v>;
     88
     89                port {
     90                        ov2680_to_mipi: endpoint {
     91                                remote-endpoint = <&mipi_from_sensor>;
     92                        };
     93                };
     94        };
     95    };
     96
     97...