cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

toshiba,et8ek8.txt (1402B)

      1Toshiba et8ek8 5MP sensor
      2
      3Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device
      4
      5More detailed documentation can be found in
      6Documentation/devicetree/bindings/media/video-interfaces.txt .
      7
      8
      9Mandatory properties
     10--------------------
     11
     12- compatible: "toshiba,et8ek8"
     13- reg: I2C address (0x3e, or an alternative address)
     14- vana-supply: Analogue voltage supply (VANA), 2.8 volts
     15- clocks: External clock to the sensor
     16- clock-frequency: Frequency of the external clock to the sensor. Camera
     17  driver will set this frequency on the external clock. The clock frequency is
     18  a pre-determined frequency known to be suitable to the board.
     19- reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor
     20  is in hardware standby mode when the signal is in the low state.
     21
     22
     23Optional properties
     24-------------------
     25
     26- flash-leds: See ../video-interfaces.txt
     27- lens-focus: See ../video-interfaces.txt
     28
     29
     30Endpoint node mandatory properties
     31----------------------------------
     32
     33- remote-endpoint: A phandle to the bus receiver's endpoint node.
     34
     35
     36Example
     37-------
     38
     39&i2c3 {
     40	clock-frequency = <400000>;
     41
     42	cam1: camera@3e {
     43		compatible = "toshiba,et8ek8";
     44		reg = <0x3e>;
     45		vana-supply = <&vaux4>;
     46		clocks = <&isp 0>;
     47		clock-frequency = <9600000>;
     48		reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
     49		port {
     50			csi_cam1: endpoint {
     51				remote-endpoint = <&csi_out1>;
     52			};
     53		};
     54	};
     55};