atmel-hlcdc.txt (1586B)
1Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver 2 3Required properties: 4 - compatible: value should be one of the following: 5 "atmel,at91sam9n12-hlcdc" 6 "atmel,at91sam9x5-hlcdc" 7 "atmel,sama5d2-hlcdc" 8 "atmel,sama5d3-hlcdc" 9 "atmel,sama5d4-hlcdc" 10 "microchip,sam9x60-hlcdc" 11 - reg: base address and size of the HLCDC device registers. 12 - clock-names: the name of the 3 clocks requested by the HLCDC device. 13 Should contain "periph_clk", "sys_clk" and "slow_clk". 14 - clocks: should contain the 3 clocks requested by the HLCDC device. 15 - interrupts: should contain the description of the HLCDC interrupt line 16 17The HLCDC IP exposes two subdevices: 18 - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt 19 - a Display Controller: see ../display/atmel/hlcdc-dc.txt 20 21Example: 22 23 hlcdc: hlcdc@f0030000 { 24 compatible = "atmel,sama5d3-hlcdc"; 25 reg = <0xf0030000 0x2000>; 26 clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; 27 clock-names = "periph_clk","sys_clk", "slow_clk"; 28 interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; 29 30 hlcdc-display-controller { 31 compatible = "atmel,hlcdc-display-controller"; 32 pinctrl-names = "default"; 33 pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; 34 #address-cells = <1>; 35 #size-cells = <0>; 36 37 port@0 { 38 #address-cells = <1>; 39 #size-cells = <0>; 40 reg = <0>; 41 42 hlcdc_panel_output: endpoint@0 { 43 reg = <0>; 44 remote-endpoint = <&panel_input>; 45 }; 46 }; 47 }; 48 49 hlcdc_pwm: hlcdc-pwm { 50 compatible = "atmel,hlcdc-pwm"; 51 pinctrl-names = "default"; 52 pinctrl-0 = <&pinctrl_lcd_pwm>; 53 #pwm-cells = <3>; 54 }; 55 };